This butcher band saw blade is made from a high quality, stain resistant steel with easy-cleaning polished sides. It features precision ground, heat-treated teeth that are razor sharp and have a tooth profile designed for cutting meat and bone, i.e. Bone-in beef, pork, lamb; fish cutting.
Warning: Products have one, but not necessarily all, of the selected characteristics. Carbide grit bonded to alloy steel blades cuts through hard materials such as hardened steel, graphite, fiberglass, composites, and nickel alloys including Hastelloy and Inconel. Blades are stainless steel with a diamond-grit edge that cuts hard, abrasive materials such as carbon fiber, ceramics, masonry, glass, composites, quartz, and silicon.
Disclaimer: The above described parts are supplied by National Band Saw Company as replacement parts for equipment. WARNING: This product can expose you to chemicals including Formaldehyde CAS #50-00-0 Trace Level Contaminant, or other Prop 65 listed chemicals, which is known to the State of California to cause cancer.
66 inch metal bandsaw blade Related Question:
How thick of metal can a bandsaw cut?
Band saws are not suitable for cutting very thin sheet metal; a rule of thumb suggests the metal to be cut should be thicker than the depth of 3 band saw blade teeth, however they are excellent for cutting thin walled profiles such as box and angle.
What is the best blade for cutting metal?
We recommend using a diamond blade that’s labeled as a ferrous-metal-cutting blade, but many tradespeople use a regular masonry diamond blade with good results.
Can you put a metal blade on any bandsaw?
Wood bandsaws run at too high a speed. Even just changing to a metal cutting blades will eat blades up fast if your cutting anything thicker than 20 ga. aluminum.
What speed should you cut metal with on a bandsaw?
To cut steel, you’ll need to run the machine at a much slower speed — about a hundred feet per minute. A machine running at this speed might look like it’s running too slowly, but running it any faster almost guarantees that you’ll damage the blade.
What speed does a metal bandsaw run at?
The speed range for cutting wood is wide but a comfortable speed is about 3000 fpm. The range for metal cutting however is around 300.. a big difference. The other difference is of course in the blade itself.
How long should a metal bandsaw blade last?
On average your bandsaw blade should last 6 months to as long as a few years depending on what your cutting with it. Make sure to match your blade strength and quality to the project and material your cutting.
Can a bandsaw cut hardened steel?
Carbide band saw blades provide high wear resistance and toughness when cutting a variety of applications such as: case hardened steels, spring steels, high speed steels, nickel based alloys, case hardened steels, composite graphite, high nickel alloys, titanium, inconnel, and other exotic metals.
Can I put a metal cutting blade on my miter saw?
Although mitre saws were traditionally used for cutting wood, with the correct blade they can make light work of cutting through steel and aluminium profiles at an angle.
What is the best TPI for cutting metal?
Cutting thinner metals, including sheet metal, requires a finer cut. Use 18-24 TPI bi-metal blades. For thicker metals such as steel pipe, angle irons, or tubing, use 14-18 TPI bi-metal blades. For aluminum, an 8-10 TPI blade is best.
Can I put a metal cutting blade on my circular saw?
Only blades and discs specified for cutting metal should be used. These professional circular saw blades are perfect for cutting through aluminium, copper, lead and other non-ferrous metals; while these diamond cutting discs will make light work of cutting through stainless steel.
What is the difference between a metal and wood band saw?
A metal cutting bandsaw is typically built more solidly than a saw designed for cutting wood, so there are no issues with the machine itself. As for the blade, the wood fibers could clog the metal blade’s teeth more quickly, and the blade will probably cut through the wood more slowly.
Can I cut aluminum with a bandsaw?
Band saws were never really considered to be a wise choice for aluminum cutting, but that has changed recently. With the advancements in band saw technology, large aluminum billet now can be cut almost as quickly as with large circular saws.
Can you use a bandsaw for wood and metal?
Yes you can. Get a metal cutting blade and off you go. Wood bandsaws are really too fast but they will do the job, you will go through the blades quicker. Just go slowly, don’t think you will cut steel as fast as you do wood.
What RPM should a bandsaw run at?
Bandsaws always use 1725 rpm. The 3450 rpm are way too fast. From contributor R: Depending on the size of the wheels bandsaw blade speeds can vary between 2000 SFPM to over 4500 SFPM.
How high can a bandsaw cut?
The resaw capacity is the maximum height (thickness) that can be cut. For the small shop furniture maker, go with 14″ as the minimum for a bandsaw, though 16″ is better. Those doing larger work might even want 18″ or 20″ machines. Just make sure you have a minimum resaw height of 12″ for versatility.