The thickness of our polishing pads is 3.2 mm. It is not the 2.8 mm or 3 mm type that is less expensive.
(a) Nine pieces of four “Cement Granite Marble Engineer Stone 100 MM Diamond Polishing Pad for Concrete Granite Marble Engineer Ston. 1 X Grit 30 50 100 200 400 800 1500 3000 6000 1 X Grit 30 50 100 200 400 800 1500 3000 600.
(b) Seven Pieces of Seven “182 MM (Honeycomb Pattern) Diamond Polishing Pad for Concrete, Granite, Marble, Engineer Stone, and other hard surface. 1 x Grit 50 100 200 400 800 1500 3000 1 x Grit 50 100 200 400 800 1500 3000 1 x Grit 50 100 200 400 800 1500 3000 1 x Grit 50 100 200 400 800 1500 3000 1 x Grit 50 100 200 400 800 1500 300.
(c) 1 piece of 4″ Velcro Backer / Pad Holder (5/8-11 Thread) and 1 piece of 7” Velcro Backer / Pad Holder (5/8-11 Thread). REMEMBER: The maximum capacity of the Velcro backer is 5000 RPM. Please do not use it with a high-speed grinder or polisher unless absolutely necessary. High-speed grinder polishers with velcro backers (the maximum speed of the Rubber Backer is 5000 RPM) should never be used together.
The recommended speed range is 3500 to 5000 rpm for this material (grinder or polisher speed must be lower than 5000 RPM). – can be used wet or dry (wet use recommended.
The thickness of our polishing pads is 3.2 mm. It is not the 2.8 mm or 3 mm type that is less expensive. (a) Nine pieces of four “Cement Granite Marble Engineer Stone 100 MM Diamond Polishing Pad for Concrete Granite Marble Engineer Ston. 1 X Grit 30 50 100 200 400 800 1500 3000 6000 1 X Grit 30 50 100 200 400 800 1500 3000 600. (b) Seven Pieces of Seven “182 MM (Honeycomb Pattern) Diamond Polishing Pad for Concrete, Granite, Marble, Engineer Stone, and other hard surface. 1 x Grit 50 100 200 400 800 1500 3000 1 x Grit 50 100 200 400 800 1500 3000 1 x Grit 50 100 200 400 800 1500 3000 1 x Grit 50 100 200 400 800 1500 3000 1 x Grit 50 100 200 400 800 1500 300. (c) 1 piece of 4″ Velcro Backer / Pad Holder (5/8-11 Thread) and 1 piece of 7” Velcro Backer / Pad Holder (5/8-11 Thread). REMEMBER: The maximum capacity of the Velcro backer is 5000 RPM. Please do not use it with a high-speed grinder or polisher unless absolutely necessary. High-speed grinder polishers with velcro backers (the maximum speed of the Rubber Backer is 5000 RPM) should never be used together. The recommended speed range is 3500 to 5000 rpm for this material (grinder or polisher speed must be lower than 5000 RPM). – can be used wet or dry (wet use recommended)
