WARNING This professional saw chain may be capable of kickback that could result in serious injury to the chainsaw operator or bystanders. Do not use this saw chain unless you have experience and specialized training for dealing with kickbacks. A saw chain with reduced kickback potential may be available.
We have an enormous selection of replacement chainsaw chains including this genuine Oregon 20 inch replacement chainsaw chain. This 20 inch chain has 70 drive links of type 73 chain, 73 chain reduces the kick back and vibration caused from sawing. This chain is made from a type 73 chain 3/8 0.58 1.5mm. Suitable for the following models;.
70 drive link chainsaw chain Related Question:
Does the number of drive links on a chainsaw chain matter?
For heavier jobs like felling trees or bucking logs, it might be better to have a longer chain with more links – but this will make it slower and less agile. Shorter chains can cut branches under two inches much faster than long ones because the short length of the blade doesn’t get caught up in them as much.
How many drive links on a 14 inch chainsaw chain?
Oregon S52 AdvanceCut Chainsaw Chain for 14-Inch Bar -52 Drive Links – low-kickback chain fits Dolmar, Ryobi, Echo and more. This product is only available through retailers or servicing dealers. Designed to fit all chainsaw brands, with models that require a 3/8 Inch pitch, .
How many drive links in a 12 inch chainsaw chain?
Oregon Chainsaw chain for Stihl Chainsaw 12″ Bar Length 44 Drive links 3/8 low profile 0.05 Gauge. This fits your . Make sure this fits by entering your model number.
Is it better to have more or less drive links on a chainsaw chain?
The greater distance between links makes for more aggressive cutting. When a chainsaw chain’s pitch measurement is displayed on the tool, it is usually on the guide bar, towards the user-end of the tool.
What’s the difference between 404 and 3/8 chain?
Secondly, the numbers 3/8″ and . 404″ refer to the pitch (distance) between the drive links – these are the bits on the chain that stick down and engage with the drive sprocket on the saw, and the sprocket on the roller-nose end of the bar.
What is the difference between a R56 and a S56 chainsaw chain?
The difference is the width of the chain track. S56 is . 050″ and R56 is . 043″.
How can I tell what pitch my chainsaw is?
To determine the pitch (chain size), you’ll need to measure the distance between any three consecutive rivets, then divide the result by 2. The rivets are the small, round pegs/studs that hold the chain segments together. Measure from the first to the third, then divide that number in half to get your chain pitch.
What is the difference between .325 and 3/8 chain?
The . 325 may be smaller and faster, but it may not be your best bet for your everyday needs. The three-eighths-inch chain is durable and lasts longer than its smaller cousin. This makes it one of the more popular switches for chainsaw users who want to get more out of their saw.
How many links does a 18 inch chainsaw have?
0.050 Gauge 0.325 in. Pitch Chainsaw Chain, 72 Drive Links.
What does S52 mean on a chainsaw chain?
S52 is the number of “drive links”
Can I use a .050 chain on .058 bar?
058 bar? You will not be able to make a straight cut to save your life. The chain will rock in the bar and accelerate the wear.
How do you size a drive chain?
To measure the chain size, if you have just the sprocket, use calipers to measure between the teeth. Measure from center to center of where the chain roller would set between the teeth that will give you the pitch. Once you know the pitch you can determine what chain size you would need.
How many drive links in a 16 inch chainsaw?
Oregon S56 AdvanceCut Chainsaw Chain for 16-Inch Bar – 56 Drive Links – low-kickback chain fits Husqvarna, Echo, Poulan, Craftsman and more. This product is only available through retailers or servicing dealers. Designed to fit all chainsaw brands, with models that require a 3/8 Inch pitch, .
What chainsaw chain do I need?
To get the correct size, simply count 3 rivets on the chain and measure the distance between them from the centre points. Now divide this by half to get your size. As an example, three rivets that measure ½ an inch across divided by two gives you a pitch of a ¼ inch.
What does the gauge mean on a chainsaw chain?
The gauge of a chain refers to the thickness of its drive links. It is determined by measuring the portion of the drive link that fits into the groove of the guide bar. It is usually expressed in thousandths of an inch: . 050″ or . 063″.