Hook-style 6 TPI teeth feature a 10-degree rake angle for a higher cutting rate. This American-made blade measures in at 72 inches long for compatibility with the WEN 3962 10-Inch Two-Speed Band Saw. This bandsaw blade features a 0.5-inch width, a.025-inch thickness, and 6 teeth per inch.
All Magnate™ bandsaw blades are welded and fabricated in the USA. The coils/material are USA brands but may not be made in the USA. All band saw blades’ pictures depict a general bandsaw blade and thus may look different from each particular item. Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. 24 raker to cut 1/16″ to 1/4″ thick material, * 18 raker to cut 1/8″ to 3/8″ thick material,* 14 raker to cut 3/16″ to 7/16″ thick material,* 10 raker to cut 1/4″ to 5/8″ thick material,* 6 Hook to cut 3/8″ to 2″ thick material,* 4 Hook to cut 3/4″ to 4-1/2″ thick material,* 3 Hook to cut 1″ to 6″ thick material,* 2 Hook to cut 2″ to 12″ thick material.
Shipping & Returns Learn more about policies and international shipping. Learn More Customer Care Talk to a friendly customer care representative to help with your purchase. 1-800-225-1153 Talk to an Expert Get advice on the latest products and help with your projects.
72 inch bandsaw blade Related Question:
Can I use a longer bandsaw blade?
Try a blade of 114” or 115” length; it’s more than likely that either one will work just fine. Most bandsaws will accept a range of blade lengths, sometimes with as much as 2” difference between the shortest and longest blades that the saw can use.
What is the largest size blade that can be used on the 14 band saw?
Olson® All Pro&trade band saw blades 93-1/2″ length fits most 14″ band saws (Delta, Jet, etc.), hard back and exclusive material, in skip, hook, or regular teeth.
Is a wider bandsaw blade better?
The wider blades are stiffer overall (more metal) and tend to track better on the band wheels than narrow blades. When cutting thicker material, the wider blade has less ability to deviate because the back end, when in the cut, helps steer the front of the blade, especially if the side clearance is not excessive.
How do I know what size bandsaw blade I need?
In inches, determine the radius of each wheel, by measuring from the center to the outside of the wheel. Apply the following formula: (R1 x 3.1416) + (R2 x 3.1416) + (2 x C) = Saw blade length. Put a strip of tape on the floor to mark a starting point.
What is a 3h bandsaw blade?
Description. These are excellent-quality steel bandsaw blades that excel at ripping thick stock and resawing, and are also suitable for roughing blanks for carving or turning. The coarse 3 tpi hooked teeth power through hard woods and difficult grain, and have deep gullets for clearing sawdust.
What size blade do I need for a 14 inch bandsaw?
Product Description. 3/16″ Wide x 93-1/2″ Long, 10 TPI, Band Saw Blade, . 025″ Thick, Fits All 14″ Delta/Rockwell, 14″ Jet, Grizzly, 14″ Reliant, Enlon, Star, Bridgewood & Most Imported 14″ Band Saws, Mild Scroll Cutting In Wood.
What size blade does a 14 inch jet bandsaw take?
To get you started your JET band saw comes with a 3/8”, 6TPI woodworking blade. Features: A 15″ x 15″ offset cast iron table that gives you more work area in front of the blades.
How much tension should a bandsaw blade be?
For carbon steel toothed blades (cutting blades) this is typically 15,000 to 25,000 PSI. Slitting type blades typically are tensioned in the range of 12,000 to 20,000 PSI. In general bandsaw blades are never tensioned past 35,000 psi.
What is 14 TPI for cutting?
8-14 TPI blades are capable of cutting wood and the occasional nail. Demo blades fall into this category. 14-24 TPI is the range of metal cutting, PVC cutting and finish cut blades. The blades cut slowly, but leave being a very smooth edge.
Can a band saw cut curves?
Whether it’s a tight curve or a closed opening, you can cut it on your band saw with a couple of easy tricks. Cutting on the band saw can be the same thing. The narrower the blade, the tighter the spots you can cut; in fact, some band saw blades rival a scroll saw for cutting tight curves.
What size blade does a 12 inch bandsaw take?
The Craftsman 12″ Bandsaw-Sander takes an 80″ blade or an 80″, 1/2″ wide sanding belt. There is a Vacuum port on the back of the saw. Hook the shop vac to the port during operations.
What blades do bandsaws have?
There are three basic tooth styles in bandsaw blades: regular, skip and hook. Regular tooth blades have proportionally spaced teeth and are ideally suited for general-purpose cutting and contour sawing. Regular blades are ideal for cutting thin materials with a fine finish.
What size blade does a Milwaukee band saw?
Milwaukee Standard / Deep Cut Portable Band Saw Blades are designed to maximize performance of any portable band saw that takes a 44-7/8″ blade. They will deliver long tooth life and exceptional durability in metal-cutting applications, including strut, conduit, angle iron, copper tube, threaded rod, and pipe.
What type of bandsaw blade is best for resawing?
Resawing involves making rip cuts in the face of a wide board. So just like you would on the table saw, you’ll want to select a blade with fewer teeth per inch (TPI) than the blades you use for crosscutting or cutting curves. For most 14″ band saws, a 1 ⁄ 2 “-wide blade with 2-3 TPI is a good choice.
How thick can a band saw cut?
Band saws are the undisputed champ when it comes to cutting curves and slicing through thick material. Many small band saws can slice though lumber a full four inches thick, and bigger saws handle six-inch cuts.