Load Power: 780.
Speed: from 500 to 23000 RPM.
In the picture, you can see that there are some parts for attachments.
Chuck: 0.4-6.5mm range.
For cutting, sanding, polishing, drilling, burr removal, and many other things, this tool is great.
The Flex Shaft Grinder Carver Rotary Tool has the following.
The load power is 780W.
Chuck: 0.4-6.5mm range.
For cutting, sanding, polishing, drilling, burr removal, and many other things, this tool is great.
a list of pakcag.
Chuck key.
3 pieces of wool fel.
Carbon brush 2.
A pack of 10 sanding bands.
3 different sanding discs are shown.
There are 9x grinding heads.
Sanding tape is used to connect the rod to two other pieces of sanding tape.
A Slice rod is one.
This is a Flex Shaft Grinder.
One foot pedal for controlling the car’s spee.
Note.
Our package came with some simple and basic things. Make your own tools if you want to grind or carve different things. Thank you very much for your help.
The adjustment screw has been found.
The variable controller pedal is terrible when it comes out of the box. However, this can be changed.
If you remove the screw at the bottom of the foot pedal and slowly open it up, you will be able to see inside. You will see the switch. White screws should be on the front side.
I hope this helps!
