84 link 3/8 chainsaw chain Related Question:
Are all 3 8 chainsaw chains the same?
Most saws use 0.325″, 3/8″, or 0.404″ pitch, with 1/4″ less common. Most consumer saws use a type of 3/8″ chain called “low profile”.
What does 3/8 mean on a chainsaw chain?
If you decide to measure the pitch yourself, just remember to measure between the middle points of 3 rivets on the chain, and then divide the number by 2. So, for a 3/8″ pitch chain, the measurement between three links would be 3/4″ (. 75″), which is 3/8″ (. 375″) when divided by 2.
How long is a 84 Link chainsaw chain?
84 links translates to about a 25″ bar length, though it can vary based on the bar dimensions.
Does number of links matter on chainsaw chain?
Chainsaws are designed to use a specific size of bar with a specific chainsaw chain link count. For heavier jobs like felling trees or bucking logs, it might be better to have a longer chain with more links – but this will make it slower and less agile.
What is the difference between 325 and 3/8 chain?
The . 325 may be smaller and faster, but it may not be your best bet for your everyday needs. The three-eighths-inch chain is durable and lasts longer than its smaller cousin. This makes it one of the more popular switches for chainsaw users who want to get more out of their saw.
Are .325 and 3/8 chains interchangeable?
You can replace a 3/8 Oregon PowerMatch nose with a . 325 PowerMatch nose on any length of Oregon PowerMatch bar you want. Then when you use up the . 325 chain just put the 3/8 nose and rim sprocket back on.
How do I choose a chainsaw chain?
To determine the pitch (chain size), you’ll need to measure the distance between any three consecutive rivets, then divide the result by 2. The rivets are the small, round pegs/studs that hold the chain segments together. Measure from the first to the third, then divide that number in half to get your chain pitch.
What size file do I need for a 325 chain?
1 dozen of 3/16in (4.8mm) by 8 inch round files for . 325 pitch chain. The superior file for sharpening saw chains is the Swiss-made double-cut file from Oregon.
How many links does a 14 chainsaw have?
Oregon S52 AdvanceCut Chainsaw Chain for 14-Inch Bar -52 Drive Links – low-kickback chain fits Dolmar, Ryobi, Echo and more.
Are there different types of chainsaw chains?
Chainsaw chains come in three main varieties. They come in full chisel, semi chisel and low profile chains, with each being used for different tasks. The chisel refers to how the teeth are cast on the chain itself – which then determines how the chain cuts through the wood.
What does pitch and gauge mean on a chainsaw chain?
Pitch and gauge of the chain. * Pitch is the distance measured on center of any three rivets in a row. This distance will most commonly be 1/4″ . 325″ or 3/8″. * Gauge is the width of the groove in the bar that the chain rides in.
What do chain numbers mean?
Chain Dimensions The digits to the left indicate the pitch of the chain in eighths of an inch. For example, a number 40 chain would have a pitch of four-eighths of an inch, or 1/2″, and would be of the standard dimensions in width, roller diameter, etc.
What is a 3/8 low profile chain?
Low profile chain is generally available in a 3/8” pitch and a . 050” gauge and fits bars specifically made for low profile chain. If your saw uses a bar that requires more than 72 drive links on its chain, low profile chain will not work with your bar and saw.
How do I identify my Husqvarna chain?
The model number of a Husqvarna chainsaw is printed on the side of the recoil assembly on the unit(eg. 455, 460, 372 XP). Husqvarna chainsaws also have a small metal plate stamped with the model number, part number, and serial number. The plate is typically located in one of four locations.
What’s the difference between .050 and .058 chain?
058. Today there aren’t any difference between .