The varying gullet sizes allow increased protection against tooth strippage when cutting on a wide range of materials and/or dimensions. Use Bi-Metal Matrix blades for horizontal gravity fed metal cutting band saws to cut a wide range of hard materials in production cut-off operations using heavy duty horizontal band saws. Narrow widths are for vertical band saws to cut radii in hard-to-machine die steels, for contour cutting, re-sawing exotic woods, and for solids and for interrupted cutting.
93 bandsaw blade for metal Related Question:
What TPI is best for cutting metal?
Cutting thinner metals, including sheet metal, requires a finer cut. Use 18-24 TPI bi-metal blades. For thicker metals such as steel pipe, angle irons, or tubing, use 14-18 TPI bi-metal blades. For aluminum, an 8-10 TPI blade is best.
What is the best blade for cutting metal?
We recommend using a diamond blade that’s labeled as a ferrous-metal-cutting blade, but many tradespeople use a regular masonry diamond blade with good results.
Can you put a metal blade on any bandsaw?
Wood bandsaws run at too high a speed. Even just changing to a metal cutting blades will eat blades up fast if your cutting anything thicker than 20 ga. aluminum.
What is the difference between a wood band saw and a metal band saw?
A metal cutting bandsaw is typically built more solidly than a saw designed for cutting wood, so there are no issues with the machine itself. As for the blade, the wood fibers could clog the metal blade’s teeth more quickly, and the blade will probably cut through the wood more slowly.
How many TPI does a bandsaw blade need?
For general wood cutting duties in typical 3/4″ material, use a 4 TPI blade for coarse, fast cutting and a 14 TPI blade for slower, smoother cutting. A blade in the 6 to 8 TPI range provides good general-purpose performance.
Can I put a metal cutting blade on my miter saw?
Although mitre saws were traditionally used for cutting wood, with the correct blade they can make light work of cutting through steel and aluminium profiles at an angle.
Can I put a metal cutting blade on my circular saw?
Only blades and discs specified for cutting metal should be used. These professional circular saw blades are perfect for cutting through aluminium, copper, lead and other non-ferrous metals; while these diamond cutting discs will make light work of cutting through stainless steel.
Will a carbide blade cut steel?
Tungsten carbide, called simple “carbide” in the building trades, is three times harder than steel; and when placed on circular saw blades, reciprocating saw blades and grinder discs, tungsten carbide cuts cleanly through steel.
Can a bandsaw cut hardened steel?
Carbide band saw blades provide high wear resistance and toughness when cutting a variety of applications such as: case hardened steels, spring steels, high speed steels, nickel based alloys, case hardened steels, composite graphite, high nickel alloys, titanium, inconnel, and other exotic metals.
Can a band saw cut stainless steel?
Bi-Metal blades are able to cut hard materials like Stainless, D-2, and dye’s. A bi-metal saw blade won’t easily fail due to its high-speed edge performance.
Can I cut aluminum with a bandsaw?
Band saws were never really considered to be a wise choice for aluminum cutting, but that has changed recently. With the advancements in band saw technology, large aluminum billet now can be cut almost as quickly as with large circular saws.
What speed should you cut metal with on a bandsaw?
To cut steel, you’ll need to run the machine at a much slower speed — about a hundred feet per minute. A machine running at this speed might look like it’s running too slowly, but running it any faster almost guarantees that you’ll damage the blade.
What speed does a metal bandsaw run at?
The speed range for cutting wood is wide but a comfortable speed is about 3000 fpm. The range for metal cutting however is around 300.. a big difference. The other difference is of course in the blade itself.
What is the difference between a wood blade and a metal blade?
Metal Cutting Blades have more teeth per inch for cutting harder, denser materials. They are typically 10 to 18 TPI, but can go as high as 24 TPI. They are also used for finish cuts in wood because they leave a smooth edge.
How can you tell if a metal saw is real?
Both saws teeth will have a set on them to clear sawn material . However wood saws teeth tend to be vertical and v shaped whereas metal teeth will be slanted and can be placed in the saw with the teeth facing towards you or away from you depending on which way you prefer , they are generally finer and closer together .