Because of the national patent obtained for this product, it is widely used in CNC lathes, general lathes, drilling machines, tapping machines, grinding machines, tool grinding machines and NC, CNC machines, punching machines, sawing machines, and milling machines, among other applications.
More than 80% of the processing solution can be saved by cooling it; the cooling effect is no less effective than the conventional water-cooled system.
Debris from the gas processing plant was blown away, making the process more secure.
The spray coolant gas and cooling liquid can be adjusted, making it simple to use under a variety of processing conditions.
Metal hose with a long service life.
Included in the package are.
1 x Mist Coolant Lubrication Spray System with Metal Hose (Metal Hose.
Parameters of technical significance.
The length of the plastic tube with the nozzle is 48cm.
The length of the pipeline is 2 meters.
The gas port has a diameter of approximately 11mm.
>2 bar of air pressur.
Features.
1) To solve the problem of the machine, a large amount of water and a simple cleaning procedure should be used.
In addition to saving more than 80 percent on processing solution, cooling effect is comparable to that of conventional water-cooled processing solutions.
3) Debris from the gas processing plant was blown away, making the process safer.
4) The spray coolant gas and cooling liquid can be adjusted, making it simple to use under a variety of processing conditions.
5) A coolant spray bottle holder is included with the purchase.
Customers will find it easier to replace the bottle with this bottle holder, which comes in a variety of popular beverage bottle sizes.
7) Metal hose with a long service life.
Notice.
1) It is necessary to use a clean liquid.
2) Avoid using high-corrosivity liquids.
3) Please ensure that the air pressure is in the range of 5-7KGF/CM2 when the liquid pressure is not output.
4)The viscosity of the liquid is less than 68cSt.
It has been granted a national patent and is widely used in CNC lathes, general lathes, drilling and tapping machines, grinding and tool grinding machines, NC, CNC machine punching and sawing machines, milling machines, boring and broaching machines, planers, slotting machines, bending and forging machines, casting and woodworking machines, gear processing and screw tapping machines, CNC machine tools, machine tool, special machine, wire curing, EDM, wire curing, wire curin.
The machining process will generate a significant amount of heat weiding, and the spray type cutting cooler is designed to perform the function of the coolant vaporization cooling liquid, while utilizing the least amount of cooling liquid possible.
When comparing this unit to the significantly less expensive variety with the plastic cardan goosenecks, there is little comparison. When those are spraying, they leak air like screens, and maintaining a proper balance of feed and air to keep them spraying for a long period of time where you want the spray is a delicate process. This unit does not leak at all; all you have to do is turn on the air and adjust the liquid feed, and you’re good to go. The best part is that you can significantly reduce the air flow while still maintaining a reasonable spray pattern, allowing your air compressor to run less frequently while you’re spraying and saving you money. A 3/8″ quick connect air plug is already installed, which will most likely need to be changed to a 1/4″ one for most home users, but this was not a big deal for me because I have a 1/4″ air plug. The metal-covered gooseneck is stiff enough to ensure that the nozzle remains in the position in which it was placed (which has no effect on the spray) and, as previously stated, there is no leakage of air or liquid. Thirty minutes after opening the package, I was putting it to use on my mill. My reviews are usually positive, but I felt compelled to write one for this mister because I couldn’t be happier with my purchase because they addressed and corrected everything that was wrong with all of the cheezy ones.
