40mm in diameter (approximately) ” (1.57″.
Approximately 20mm in height ” (0.79″.
30-millimeter-diameter effective surface of the knife ” (1.18″.
200cm is the approximate length of the cable ” (78.74″.
MaterialSolid alloy material that has been studied and proven to be long-lasting. Tool for engraving machine that is both practical and useful.
Included in the package.
Equipment: 1 x CNC router engraving machin.
Specification.
Brand new in its original packagin.
Solid metal alloy as the primary component.
Color: Black with a splash of re.
Touch Plate for CNC Router Mill Tool Configuratio.
Mach3 Tool Setting Probe New Milling Hot Kit Cnc Z Axis Router Mill Touch Plate Mach3 Tool Setting Prob.
Using these touch plates, you can quickly and easily adjust your tool height and zero your z-axis. All of these features are fully functional in Mach 3 as well as many other CNC controller software packages.
How To Make Use Of It.
Connect the wire from this tool check instrument to the tool connector on your machine’s control board, and then connect the GND on the control board to the frame of your router. (Optional) (the frame of the router and the spindle must have connections.
The perfect size indicates that the tool Z centerpoint can be determined precisely without the need for any guesswork. Sure, you could make this simple device yourself relatively quickly, but my time is more valuable than the low cost of this item, which quite simply performs the function for which it was designed.
