An extra hook and loop sanding pad is included. In addition to the 2″ Backing Plate that is carried by the sander, our air sander is equipped with an extra 3″ and 2″ hook and loop sanding pad that is used for replacement.
Controllable speed and eccentric double rotation are two features of this device.
The use of a double rotation grinding method improves the uniformity and smoothness of the polishing effect. For faster and more accurate results, use the built-in speed regulator on your sander to adjust the speed at which you work to meet your various sanding, polishing, and waxing requirements. Handling and operation with a single hand greatly reduces operator fatigue while delivering the best possible performance.
✔Specificatio.
——15,000 RPM Free Rotational Spee.
——-4 cubic feet per minut. 90 PSI is the amount of air that is consumed. 1-1/4″ Air Inlet ——. ——. Connector to the United State.
✔TIPS——.
Because the fit is too tight, the outer diameter of the rotor may collide with the inner bore of the cylinder in the new eccentric grinder machine. This may cause some resistance in the new machine. This occurs when the air pressure is extremely low (generally less than 4 kg), and it is not indicative of a problem with the product’s quality. ——. Solution——. Remove the sticky disk, use your hands to manipulate the black eccentric block, and then reconnect the air pump so that it can function normally.
✔Maintain——.
During operation, the machine is extremely precise, and its speed is extremely fast. If there is any fine sand or gravel in the air inlet, it may cause the impeller to break and the machine to fail if the iron filings get into the movement. Make sure the air inlet is clean. Always use a water-oil separator and drain the machine on a regular basis to ensure that it is completely dry. In order to extend the life of the machine, it is necessary t. Every day, inject 3-5 drops of pneumatic oil into the air inlet before using the tool, and allow the tool to run for approximately 20 seconds.
Product Specification.
90 pounds per square inch of air pressur.
Air consumption is 4 cubic feet per minute (CFM).
Free Speed: 15000 revolutions per minut.
Color: crimso.
1/4″ air inlet siz.
There are two sizes of sanding pads available: 2″ and 3″.
Method of polishing: eccentric double rotation with a circular motio.
What’s Included in the Box.
mini air sander (size: 2″.
1* Small Screwdriver (optional).
1* Connector to the United State.
(1) Sanding Pad (2 inch and 3 inch in diameter) (Extra .
manual de instrucciones 1.
What are the benefits of using Valianto’s Random Orbital Sander.
It comes with two sanding pads, one measuring 2 inches and one measuring 3 inches.
The use of a comfortable-grip handle significantly reduces fatigue.
The Valianto Sander has a maximum speed of 15000 RPM, which allows you to complete a variety of different applications.
Ideal for DIY projects around the house or in the car. This product is ideal for smoothing wood surfaces, such as those found in cabinets and furniture.
How to Use Your Pneumatic Sander.
This tool is designed to be used as a handheld device and is powered by compressed air. In order to do so, it is necessary to have an air compressor that will provide clean, lubricated air at the point where the air hose is connected to the tool, and for the tool to be running with the level fully depressed while the air hose is connected.
This was purchased in preparation for applying a ceramic coat to my car and truck. Despite the fact that it is heavy and performs exceptionally well, my small pancake compressor could not keep up. It has a very comfortable grip, but I’m not sure how long it will last. I’d buy it again if the price was right.
