Tilting Rotary Table 4″ / 100 mm Horizontal & Vertical Tilting Rotary Tabl.
Chuck and backplate for milling machine with a diameter of 65 mm.
Four-way rotary table (horse/vertical). In the flat position, the table height is 66 mm.
CLAMPING KIT M 6 INCLUDE.
Horizontal and vertical rotary tables are available. For Milling Machine Hor/vert, 4″ / 100 mm Tilting with 65 mm Lathe Chuck & BackPlate for Milling Machin. “Rotary Table No. 4. In the flat position, the table height is 66 mm. The table was graduated in five degree divisions around the entire circumference. The base measures 145 x 126 mm and has two 10 mm mounting holes that are separated by 110 mm. The table can be used anywhere because it can be tilted up to 90 degrees. Chuc. Vertical center: 100 mm / 4″ Diameter: 100 mm / 4. Height: 2-1/16″ in height (Approx 51 mm. The hand wheel can be set to zero. The hand wheel has been graduated in 10-minute increments. Calibrated in 5 minutes incrementing around the rim at a 36:1 aspect rati. It is possible to use it both vertically and horizontally. CLAMPING KIT M 6 INCLUDE. These Clamping Kits are used in conjunction with our 3” Rotary Table in order to clamp the Machine Table in place. Clamps are included in this set. 4 LN screws with M 5 threads, 4 flange nuts, and 2 T-nuts with Metric threads are used in this assembly. All four sides have been polished and ground to a high shine.
WORKS EXTREMELY WELL
