High speed steel is used to construct this 1/8 inch (3.17mm) shank that measures approximately 40mm in length.
High efficiency and energy savings make this machine ideal for jewelers, hobbyists, and crafters.
The product has a good processing quality and finish, is simple to use, is safe and reliable, reduces labor intensity, and is not blocked.
Works primarily with small rotary tools for do-it-yourself carving, and is suitable for thin wood, plastic, root carving, and engraving applications.
Note: When cutting, the direction of the cut should be smooth and move from right to left; do not cut back and forth like when using the wheel.
For Dremel Rotary Engraving Wood Working Tool, Bestgle HSS Routing Router Bits are the best choice.
Specification.
High-speed steel 4241 is used in this design.
Silver is the color of choice.
The length is approximately 40mm.
Dimensions: 3.17mm/ 1/8 Inch Shank Diamete.
Feature.
1. For the processing of metallic and non-metallic surfaces with an engraving machine or mini-Drill, various forms of cutting parts are available to ensure efficient material processing. The length of the cutting part is approximately 40mm, and the diameter of the shank is 3mm.
2. High production efficiency combined with a high level of processing finis. Simple to use, safe and dependable, reduces labor intensity, and does not cause blockage.
3. Suitable for wood carving, root carving, olive pit carving, with a sharp blade that is long-lasting.
4. It is used by jewelers, hobbyists, crafters, modelers, and other craftspeople.
5. Chips quickly and has a high hardness, making it ideal for root carving and engraving in wood and plastic.
Sixth, the following models are suitable for use: the hanging mill, the electric mill, the drill, the grind, and the Taiwan can clamp rod diameter 3mm machin.
Warm Recommendations.
1. When using carbide burrs on pneumatic or electric tools, the speed of the burrs is generally 6000-40000 revolutions per minute. The tool must be clamped tightly.
2. The cutting direction should be smooth and move from right to left; do not cut back and forth as if you were using a wheel; and be careful not to use too much force when cutting (pressure is generally not more than 4 kg).
The following items are included in the package.
2 x 10pcs HSS Routing Router Bits in a set of two (Total 20 pieces.
I was underestimating the power of these tools. I was skeptical at first because it seemed too cheap to be of good quality, but I decided to give it a shot. Omg. What a pleasant surprise. They completed the task that a more expensive set would have completed. The oak they were used on cut like butter when I applied them to it. I’ll be ordering more because I have a bad habit of losing them. lol.
