Flexible head with three positions for easier access in confined spaces.
Handle with cushion grip that has been ergonomically designe.
This tool is capable of cutting MUFFLER Clamps and hangers, sheet metal, radiator hose clamps, bumper bolts, and steel rods up to 3/4-inch in diameter.
3 inch disc and a motor with a horsepower of 0..
Japan is the source of this product.
The reversible flex head Cut-Off tool from SP Air Corporation has a three-position flexible head that allows for easier access to tight work areas while throwing sparks downward instead of upward as is typical with other cutoff tools. Some of the product’s features are as follows: free download speed. 120, 000 RPM, 8.8-Inches in length and 2.8 pounds in weight, required air pressure is 90 PSI, average air consumption is 4 CFM, air inlet is 1/4-inch NPT, and the hose size is 3/8-inch in diameter. Rear exhaust, safety throttle, built-in power regulator, direct drive motor, graduated trigger, and metal guard are some of the other features that the product has to offer as well. A number of features, such as a tilt head and reverse function, allow the flex head Cut-Off tool to cut materials such as muffler hangers, sheet metal, radiator hose, clamps, bumper bolts, and even steel rods up to 3/4-inch in diameter.
There’s a lot of power.
