Driver with a constant current of 350m.
Dimming with an alternating current phase-cu.
Work with TRIAC dimmers on both the leading and trailing edges.
The protection against short circuits and overheatin.
Unit of power of class .
Please keep in mind that this is a constant current driver. Make certain that it is only used with constant current loads that are compatible with it.
Additional Characteristic.
* Active PFC function is pre-installed.
* Free air convection is used to cool the room.
* A plastic case that is completely isolate.
* IP30 protection is provided.
There is no FG in the Class II power unit.
* Suitable for LED lighting applications in the home or offic.
* A 100 percent full load burn-in test was performed.
* High degree of dependabilit.
Specification.
350mA is the maximum rated current at the output.
The operating voltage range for the output is 24 to 48VDC.
Power Rated at Output: 16.8 watt.
Voltage of the output when no load is applied: 63.
Voltage range for the input: 100 to 120VA.
The input frequency range is 50 to 60 hertz.
Input alternating current (AC): 0.4A/115VA.
Power Factor: greater than 0.9/115VA.
Temperature range of operation: -30° to +60°.
Dimensions (length x width x height): 84x57x29.5m.
Why do you advertise this as compatible with 24vdc-48vdc when the output is 48-50vdc, not really compatible with 24vdc tape lights
