Sand glass, sandblasting, surface polishing, and machine parts are some of the applications.
It is made of aluminum and boron carbide, and it is extremely durable.
The manual sandblasting machine as well as the box type automatic sandblasting machine are both suitable.
The pattern and velocity of the abrasive that exits the nozzle are determined by the taper and length of the nozzle’s inlet and outlet, respectively.
As the air and abrasive mixture exits the end of the hose, the blast nozzle accelerates the flow of air and abrasive.
Specifications.
Condition: This item is completely brand new.
Aluminum and boron carbide are the materials used.
carbide of boro. Nozzl. 10mm 8mm 7mm 6mm 10mm 8mm 7mm 6mm Internal diameter:10mm 8mm 7mm 6m.
Operation.
When the nozzle washer is in place, the operator screws in the nozzle, turning it by hand, until it is firmly against the washer. 2.The operator then removes the nozzle washer.
2.After ensuring that all associated equipment has been properly assembled and tested, the operator directs the nozzle toward the surface to be cleaned and presses the remote control handle to initiate blasting.
Three. The operator maintains the nozzle between 18 and 36 inches from the surface and moves it smoothly at a rate that produces the desired level of cleanliness. Each pass should have a slight overlap with the previous one.
4.When the orifice wears down to 1/16-inch beyond its original size, the operator must replace the nozzle with a new one.
Notice.
Please allow 1-3cm error due to manual measurement and ensure that you will not be inconvenienced before placing your order.
Please keep in mind that because of the different placement of images, there may be chromatic aberration in the colors.
This is far superior to the bead blaster that I previously used. Now that I have a foot operator unit, I can stop using my finger to hold the trigger.
