Charger with a 2.5A output that is compatible with the Girapow 18V lithium ion battery GBL18B (B087JTKTCL), the impact wrench (B08332PSP2), the rivet gun (B086W1W2V6), and the LED work light (B086W3K3XB, among other things.
The intelligent charging feature automatically charges 18V lithium-ion batteries and shuts down the device when they are fully charged. Diagnostics with an LED indicator communicates the battery charge status, allowing you to use the device without interruption.
Battery status and remaining charge capacity are communicated through built-in LED indicator lamps, which also serve as diagnostic tools.
Over-Temperature Protection is a feature of the product.
Because of the superior heat dissipation technology, the charge cycle time is reduced, and downtime in the field is reduced.
Charging Considerations is an abbreviation for “Charging Considerations..
The charging operating temperature of this 18V charger ranges from 23°F to 104°F; if the battery is hot, it is recommended that it be allowed to cool before recharging.
Specifications for the charger.
Replacement Charger is the product type.
GBL18C2 is the model number.
Compatible with the following batteries: Girapow 18V Li-ion Batter.
Input voltage ranges from 100V to 240V at 50/60Hz.
Output voltage and current: 18V 2.5.
Temperature range for charging: 23°F to 104°.
Compatible with the following battery models.
Girapow GBL18B and GBL18B2 are two of the most common.
Specifications of the charger.
Charge at a rate of 2.5 amps for quick recharging.
Comply with the CE, FCC, and RoHS security testing requirements.
Over-load protection is provided.
Protection against excessive temperature.
Over-current protection is provided.
Protection against low-voltage inpu.
Protection has been inadequately provided.
Instructions for using an LED indicator.
Plug it in and it will flash with a green light.
Charging the battery.
-When the percentage falls below 80%, the red light is always on.
the red and green lights are always on in the 80 percent to 99 percent rang.
When fully charged, the green light remains illuminated at all times.
When the temperature is too high, the red light will flash.
Battery with a short circuit: flashing red and green light.
Charger that is not working properly: flashes with a yellow light
