Three high-quality bearings are included in the set of four (C7005x2 + C7002x2).
The frequency is 400Hz, and the runout off is less than 0.02mm.
In general, the spindle motor is best suited for non-metallic engraving.
This spindle is only capable of rotating in the clockwise direction; it does not support reverse rotation. Please keep in mind that the spindle speed cannot be lower than 9000rpm!!.
This item has received ISO9001 quality certification, indicating that it is of the highest possible quality.
Ordinary bearings will not be able to maintain this high rotation speed for an extended period of time in an extremely high-speed working environment.
PackageInclude.
1 x 2.2KW spindle motor with water cooling (ER20,220V,24000rpm,80x213mm,4 bearing.
Specification.
Stainless Steel is the primary material.
Dimensions: 80x213mm (Middle body diameter:80mmxLength:213mm.
2.2 kilowatts of powe.
Voltage: 220 volts alternating curren.
8A is the current value.
Frequency range: 0-400 hert.
Speed ranges from 0 to 24000rpm.
Water cooling is used for cooling.
Precision: 0.003–0.005 millimeter.
Less than 0.02mm of runout is allowed.
Grease is used for bearing lubrication.
ER20 is the collet size.
C7005x2 and C7002x2 angular contact ball bearings are included in this set of three bearings.
The primary application is in the wood, glass, and PVC industries.
This spindle performs admirably. The only thing that bothers me about it is the connection plug. It should only allow connection when the device is in the proper orientation, but it can be connected both correctly and incorrectly by rotating the device 180 degrees. When you are constructing your cable connection, make sure that the plug is connected in the proper orientation.
