Fits perfectly on a 2×72″ knife-making/belt-grinding machine.
1/2″ diameter is the diameter of the center mounting hole.
Axle holes measured from center to center: 10.5.
The material for this plate is 3/8″ hot rolled steel that has been precision CNC cut.
The following items are included in the package. 1 piece D-backing plate for a belt grinder; 2 pieces grade 8 bolts; 4 pieces nylon spacer.
Fits perfectly on a 2×72″ knife-making/belt-grinding machine.
The material for this plate is 3/8″ hot rolled steel that has been precision CNC cut.
1/2″ diameter is the diameter of the center mounting hole.
Axle holes measured from center to center: 10.5.
The following items are included in the package.
— 1 pcs. D-backing plate for belt grinder.
— two pieces of grade 8 bolts.
— 4 pcs nylon spacers to be use.
One thing to note is that the center hole is specified as 1/2″, which led me to believe this had SAE threads, which was not the case; the included bolts are M12 metric, which were too long, so I purchased some shorter ones. It also necessitated some demurring (sharp edges), which was no problem at all. Everyone agreed that it was a good deal.
