It can drive 16 GA straight finish nails from 1-1/4-inch to 2-1/2-inch.
There is a BTFP71875 stapler that can drive 3/8-inch crown staples from 1/4 to 9/16 inches and 18GA brad nails from 1/2 to 5/8 inches. It is a very strong machine.
1/4-inch x 15-foot PVC air hose comes with fittings.
Three-piece nailer and compressor combo kit: 6-gallon pancake compressor, 18-gauge 2inch brad nailer (for finishing), 2-1/2-inch 16-gauge straight finish nailer (for finishing), 3/8-inch crown stapler, 15-ft. air hose. For finishing and interior projects.
Great: Even with the hose attached for a weekend, there were no leaks. For how powerful the motor is I would say it is very quiet. The tank fills very quickly and the motor is very quiet.
Over 1,000 nails have gone through it without a hitch. Besides, the pressure adjustment knob takes a long time to move and isn’t very clean. Trust me, set the tank regulator to 75 to 80 psi. Then, adjust the regulator until the nails are flush. Then, TAPE THE NOB IN PLACE and adjust the pressure regulator as needed for harder or softer wood.
Have a few hundred Brads through the Brad nailer now and there haven’t been any problems with it. It can’t be changed, but that can be fixed with a tank regulator.
Stapler: I haven’t used it.
