In this package, you will receive a Genmitsu CNC MDF spoilboard as well as a GS-775M 20000RPM 775 CNC spindle motor. (Please keep in mind that they will be shipped separately..
A spoilboard is a temporary work surface that is mounted above the router’s table. It has the ability to protect the router table from damage while also serving as an expendable surface that can be used for workholding purposes.
MDF is the material used (Medium-Density Fibreboard). MDF is extremely dense, resulting in increased weight while also increasing strength and durability. The dimensions are 30 x 18 x 1.2cm (11-4/5″ x 1/2″).
Usage: This tool is most commonly used when cutting or carving wood materials. When cutting on the MDF spoilboard, you are preventing damage to your CNC table from the cutting tools on the spoilboard itself. It can help to ensure the stability of the cutting material, allowing for more precise cutting to take place. Genmitsu 3018 series CNC router kit is a perfect match for this product.
Spindl. DC 24V is used for the motor. The speed is 20000 per minute. The PCB for motor noise suppression has been pre-installed, which results in improved performance. It is designed to work with the Genmitsu 3018 Series CNC router.
SPECIFICATION.
Spoilboard.
MDF is the material used.
SPOILBOARD MEASUREMENTS: 30 cm by 18 cm by 1.2 centimeters (11-4/5 inch by 7 centimeters and 1/2 inch).
6mm is the diameter of the hole.
Motor: 775 c.
Rated Voltage: 24 volts direct curren.
No-Load Speed: 20000 revolutions per minut.
Dimensions of the motor: 43 x 68 mm (D*L.
Brush with a Double Ball Bearin.
Rotation in the clockwise and counterclockwise direction.
Both the board and the spindle have exceeded my expectations. High-quality materials are used.
