a belt with a width of 4 inches and a speed of 1,640 ft./min.
In a labyrinth, the motor and bearings are sealed and protected from dust and debris. This means the tool will last longer.
An extra-large grip on the front of the machine is set up for comfort.
Innovative: The sander’s nose and side can be used to sand close to the wall. The belt sander is the style.
An overview of what this item is abou.
9403 is Makita’s 4″ x 24″ Belt Sander, and it has a lot of power and speed, but it also makes less noise and is easier to use. To be used by people who work with wood, carpentry, furniture making and floor installation, the 9403 is ideal. It is also good for people who work with decks and general contractors who need a top belt sander.
The 9403 has a powerful 11 AMP motor with electronic speed control to keep the speed steady even when there is a lot of weight on it. It has a 4-inch wide belt and a speed of 1,640 ft./min. for quick stock removal. At only 84dB, the 9403 is one of the quietest sanders in its class. This means that it makes less noise.
There is a Manufacturer.
This belt sander has a long base so that it can be used to sand close to the surface. It has a 4-inch wide belt with a speed of 1,640 ft./min. and a noise level of 84 dB. This makes it easy to remove stock quickly. People who work with this machine will be very comfortable thanks to the large front grip, which also lets them change belts quickly. The ceramic wear plate can be replaced, and the low profile makes it easier to balance and less likely to gouge. With a very good dust collector, the grit stays inside. This sander has two layers of insulation, so it is safe.
FEATURE.
A belt sander that is the most quiet in its class (only 84dB.
a belt with a width of 4 inches and a speed of 1,640 ft./min.
Labyrinth construction keeps the motor and bearings from getting dirty.
An extra-large grip on the front of the machine is set up for comfort.
The cord is on the upper part of the handle for the convenience of the person who is using it.
The dust bag can move around 360° for easier use.
It has a unique shape that makes it possible for the sanding to be done right next to the walls.
Insulated on both sides.
What’s inside the box.
Abrasive belt (#80; 742322-9): 1 of the.
The dust bag (122562-9.
SPECIFICATION.
4 inches wide by 24 inches long.
Speed: 1,640 ft. per minut.
There are 11.0 amps (115V.
The overall length is 13-7/8.
The net weight is 13.0 lbs.
15.4 pounds.
I put in a new oak floor in my living room. I didn’t want to risk it by using a professional drum sander, so I used a belt sander even though it took longer. People who bought this sander on Amazon said it worked great on a scrap piece of 2×12. I will not hesitate to sand all the floors in my house with this sander. This sander is very quiet and smooth. It will cut like the devil, so you won’t be able to think about anything else while you’re using this sander. It has been a while since I’ve been using this sander. Here are a few things I changed because the bag is just an advertisement flag and this sander is out to eat the cord. It took a lot of tape and a hose clamp to make it work. I used a sump pump hose instead of a bag, and then I taped an extension cord to it. Change: This made dust-free sanding possible, without having to worry that sanding the cord would damage it.
