Eleven pieces of a 5 inch diamond polishing pad for concrete, granite, marble, and stone polishing, in addition to a rubber hook and loop backing pa.
The 11 diamond pads are as follows: 2 X Grit 50 100 200, 1 X Grit 400 800 1500 3000 6000, 1 X Grit 400 800 1500 3000 6000.
1 piece hook and loop fastene. Rubber backing pad (for arbors up to 5/8″). Backer backing pads are also equipped with a water feed hole for wet polishing.
4500 RPM is the maximum speed. Neve uses it in conjunction with a high-speed grinder.
The pads set performs well when used dry; however, wet polishing may produce better results.
The Stadea Diamond Polishing Pad for concrete stone measures 5 inches in diameter. 11 pieces and a 5 inch 1 rubber backer are included. The 11 pads are as follows. Grit 50 100 200 (two times. 1 x Grit 400 800 1500 3000 6000 1 x Grit 400 800 1500 3000 6000 1 x Grit 400 800 1500 3000 600. (1) Rubber Velcro Backer (5/8″ thread arbor), one (1) piec. Because the backer has a water feed hole, it is possible to do wet polishing. The set is suitable for both wet and dry polishing of stones; wet polishing may produce a better shine on some stones than dry polishing. Keep in mind that the maximum capacity of the Velcro Backer is 4500 RPM. Please refrain from using it with a high-speed grinder.
It is an excellent product, and I would recommend it.