In addition, the electric screwdriver has a handle that can be turned around, so it can be used with different types of materials. It has 9+1 torque settings, from 1N.m to 6 Nm, so it can be used with different types of materials. As long as you choose the max torque of 6N.m, you can even screw into wood. As soon as you push the “push” button on top, you can turn a handle that can be used to work in tight spaces.
It comes with 45 pieces of “rich” accessories and “wide” uses. The cordless screwdriver set comes with 34 bits, 8 sockets, a socket adapter, and a USB cable. They are all in a nice case with the power screwdriver, so you won’t have to worry about losing bits again. Rich-bit set has a wide range of applications, such as the long screwdriver bit for deep screws, the socket for small nuts, and so on. These tools can be used for a lot of different things.
2.0Ah LI-ION BATTERY + EASY CHARGING – A 2000mAh lithium-ion battery is more durable and lasts longer. It can screw at least 400 screws when it’s charged. When it runs out of power, you can use a power bank, a phone charger, or any other USB port to charge it. This is easier to figure out than the screwdrivers with their own chargers and saves you time.
QUICK SELF-LOCK CHUCK & F/R CONTROL – 1/4 inches (6.35mm) hex with a self-locking design makes it easier to change screwdriver bits and not have to worry about bits falling while working. The forward and reverse switch lets you freely change the direction of the screws and do small things like hang and adjust pictures, fix or build cabinets, and furniture.
There is a battery screwdriver that has two bright lights on the front and the back of the tool. Electric screwdrivers have front lights that can help you find your target when you work in a dark place. If you want a brighter light to find the right screws in the mess, you can rotate the handle and change the button at the bottom of the grip.
I had a similar B&D cordless electric screwdriver for about 10 years before it finally broke down after that long, but it still worked. Decided to try this TECCPO one out because I didn’t like the look of the new B&D models, so I decided to try this one out. I like that I can move the handle to be straight or angled, which helps me reach and grip the tool depending on the project. For a good grip, the rubber coating on the back of the handle is made of rubber. They can be very useful when you need them. Especially the bottom one. I would have liked them to be a little brighter than they were. The ratcheting works well, but it’s not always perfect, it seems. I’m still getting used to it because it’s different from the B&D, and I’m still getting used to it. The ON button is simple to use and doesn’t have a speed setting. It’s just on. You can set the Forward / Reverse button right next to the screwdriver. It can be set so that when the screwdriver is pressed against other tools in a toolbox, it doesn’t turn on. The front light still works, though. You can charge your phone right next to the ON button with a micro USB cable that came with it. The charging LED lights up red while charging and green when the phone is fully charged.
Because this screwdriver has been used so far, I know how to use it. Replaced a few outlet covers, lowest toque setting helped. TECCPO screwdriver: I also bought a few pieces of furniture from IKEA, and this screwdriver did well. A few hours later of mostly continuous use and it was still working great. Can’t say yet how long it took to charge because I charged it overnight and didn’t keep track of it. I like that it doesn’t need a special cable to charge. I can use a generic micro USB cable to charge it anywhere there is a USB port. The carry case is good. It’s light but strong, closes well, and keeps everything in order. There are a lot of attachments that can be used as spares, but I prefer my high-quality attachments made by well-known brands. I don’t think I’ll be using the case however as it is easier for me to just keep this screwdriver in the larger toolbox.
I would have liked to see the charging port have a cover to keep the dust out. To know how much charge is left, it would also have been nice to have a battery status light-bar that would show how much is left. Without it, there’s no way to tell how much juice is left and when the battery might die. Lubricate the parts that connect quickly and where the handle turns so that they don’t get stuck together. Both of them work better now. Because this screwdriver is worth the money in the end, it’s worth the money. It isn’t professional-quality by any means, but it does what it says it does and should be enough for most people.
