For drywall applications, a high-speed motor has been developed.
The patented feed system is designed to fit into corners.
Our EZ load feature allows you to load items quickly.
Feed system with a corner-fit desig.
Screw length adjustment without the use of a too.
Screwdriver with automatic feed powered by lithium-ion battery. High-speed motor with a rotational speed of 5000 rpm. Feed system that fits into corners. Screw length can be adjusted without the use of a tool. With the depth lock, you can fine-tune the depth of your drive. Bit change with a single slide of the button. The trigger has a variable speed setting as well as lock and reverse. Belt hook that can be worn either right or left handed. Screw lengths: 1″ – 2″ for drives #6 – #8, #6 – #8 for drives. (1) charger, (1) drywall nosepiece, (1) wood nosepiece, (1) storage bag, and (2) drive bits are all included with the purchase of this kit.
My time spent picking up screws from the ground was significantly longer than if I had used a conventional drywall gun. The pressure you apply to a screw must be just right; too hard and it will flip the screw out; too soft and it will not feed the next one. Then, when you press harder, it simply flips the screw out of the way. I would say that one out of every four screws is successful. When you’re holding up Sheetrock, it’s a frustrating experience. Senco makes all of my nailers and air compressors, and they all perform admirably. This product is just a little bit short of the mark. I was also using collated screws made by the Senco company.
