Buy Jiozermi 16-piece 4 inch diamond polishing pad set, wet and dry polishing kit 50# to 8000# grit with hook and loop backer pads for Granite Stone Concrete Marble Floor Grinder or Polisher

In this package, you will receive two (2) hook and loop backing pads, two (2) shanks, and twelve (12) grit polishing pads (50#, 100#, 150#, 300 #, 500 #, 800 #, 1000 #, 1500 #), two (2) hook and loop backing pads and two (2) shanks.

When it comes to size, the diamond pads are 4″ in diameter and 0.12″ in thickness. The diameter of the velcro rubber backing pad is 4″, and the thread is 5/8-11. The shank has a diameter of 0.3″ in diameter. 2500 revolutions per minute is the recommended speed, and 4500 revolutions per minute is the maximum capacity.

What is the material: The diamond polishing pads set is made of diamond powder and resin powder for wear-resistant and high efficiency, as well as being aggressive and lasting a long time. It can be used for both dry and wet polishing, but the best results are obtained when using water to polish.

When and where can it be used: The wet and dry polishing kit can be used on any solid surface material, including granite and marble. It is ideal for granite stone, concrete, marble, stone, and tiles, among other things. Please keep in mind that you should never use a high-speed grinder.

Customers who are 100 percent satisfied. Jiozermi is so confident in the quality of our product that we will refund your hard-earned money if you are not completely satisfied with your purchase within 90 days. Simply contact us and we will make things right. Because everything is on us, there is absolutely no risk in trying the product today.

Jiozermi, a company that specializes in tool and home products, strives to provide customers around the world with products that are dependable, high-quality, and practical. Your complete satisfaction is our number one priority. We hope you will be able to try our products.

Feature.

Flexible and adaptable to a variety of polishing applications.

In order to facilitate disc replacement, pads are backed with nylon materials.

Backer pads have a strong adhesion ability and are difficult to remove.

Different colored coded pads are used to make it easier to distinguish between them.

On a more positive note.

Please keep in mind that you should never use this with a high speed grinder.

When dry grinding, it is important to use safety equipment to avoid injury.

It can be used for both dry and wet polishing, but the best results are obtained when using water as a solvent.

The maximum speed of polishing pads is 4000 revolutions per minute, and the recommended speed is 2500 revolutions per minute.

Installation is simple.

Step 1: Attaching the 8mm shank to the backer pads with hook and loop fastener.

Diamond Polishing Pads are used to connect the hook and loop backer pads together in Step 2. Installed on the grinder or polisher in the third step.

Package Contents.

a total of two 0.3inch(8mm) shank.

2 x Backer Pads with Hook and Loo.

1 x Girt Polishing Pad (50 Girts.

1 x Girt Polishing Pad (100 Girt.

1 x Girt Polishing Pad (150 Girt.

1 x Girt Polishing Pad (300 Girt.

1 x Girt Polishing Pad (500 Girts.

1 x Girt Polishing Pad (800 Girt.

1 x Girt Polishing Pad (1000 Girt.

1 x Girt Polishing Pad with 1500 Girt.

1 x Girt Polishing Pad (2000 Girt.

Pad for polishing with a 3000 Gir.

1 x Girt Polishing Pad (5000 Girts.

1 x Girt Polishing Pad (8000 grit.

Specification.

Diamond powder and resin powder are used as the primary building materials.

Diamond Pads have a diameter of 4″ (100mm).

Diamond Pads have a thickness of 0.12″ (3mm).

Diameter of the backing pad: 4″ / 100m.

The diameter of the shank is 0.3″ / 8mm.

Leave a Reply

Your email address will not be published. Required fields are marked *