1 each of the following grits: 50, 100, 200, 400, 800, 1500, and 3000.
5/8 of a pound “-11 female threads, each measuring 2 inches in diameter and 1-5/8 inches in height.
The product should only be used in dry conditions.
It is recommended to use vertical oscillation for even wear.
The maximum speed is 4,000 revolutions per minute.
The Dry Diamond Polishing Drum Wheels are intended for dry polishing of sink cutouts or tight radiuses. They are made of diamond powder. A complete set will typically include grits of 50, 100, 200, 400, 800, 1500, and 3000. Polish with grits ranging from 50 to 3000, respectively.
It is recommended that you use a P2 (Position 2) diamond grinding drum wheel with medium grit after the coarse grit of the P1 (Position 1) diamond grinding drum wheel for harder stones in order to achieve a more even surface start before polishing. Additionally, polishing drum wheels will have a longer lifespan as a result of this.
You can purchase our adapter 5/8 separately “To be used with power tools that have an M14 thread spindle, convert -11 to M14.
We, DAMO Diamond Tools, LLC, are the exclusive distributors of DAMO Trademark products, as evidenced by the clearly marked logo on the product listing and in the product image.
These are not the same as the photo; there is no damo on the side as in the photo. They were completely worn out in less than 24 inches. Sets of very poor quality do not last very long. Used one variable speed polisher and had some success with the style drum, but the pad itself only lasted a few minutes before it was completely depleted and causing black rubber to burn on my polish job. Do not purchase this set.
