MADE IN THE UNITED STATE.
The Nozzle Tip for Tungsten Carbide Sandblastin.
Great Quality and Endurance Means It Will Outlast the Competitio.
cfm is approximately 10-15 liters per minute.
It has an inside diameter of 1/4″ on the smaller side and an outside diameter of 3/8″ on the larger side. The outside diameter measures 1/2 inch “… The length is 1 and a half feet..
Tungsten Carbide is a chemical compound that is used to make tungsten carbide. Nozzle for Sandblastin. You should consider using one of these if you want to save money on Sandblasting Nozzles. I started sandblasting a few years ago and purchased a set of carbide nozzles, which were marketed to me as such. I paid $45.00 a piece for each piece. They’d last me about 1-2 months at the most. Tungsten Carbide nozzles were suggested by a friend of mine who works in a machine shop and claims he could make them for me. I placed an order for ten about two years ago. I’ve only used four so far, and the one I’m currently using is still in good condition. One of these for $30.00 will prove to be more durable than the others. Try it and see. The fact that it is “Made in the USA” is the cherry on top. There are approximately 10-15 cubic feet per minute (cfm). It has an inside diameter of 1/4″ on the smaller side and an outside diameter of 3/8″ on the larger side. The outside diameter measures 1/2 inch “… The length is 1 and a half feet “…
I purchased this after comparing the price on Skat-Blast, and there is no difference in the quality or fit between the two. Depending on how much you use them.. When it comes to my home auto restoration projects, my first one lasted about 15 years..I’ll buy another one when the time comes.
