Portable PCP Air Compressor: The portable compressor is powered by either a 110V outlet or a 12V battery that is connected to the vehicle. Incorporated into the design are a loading pressure of 300 bar/4500Psi/30Mpa, a pre-set pressure and an automatic stop setting, making it suitable for use with any type of pre-compressed air rifle. An anti-explosion valve and cooling system are also included. A built-in thermometer is used to monitor the temperature of the compressor and, as a result, prevent internal overloading.
Water and oil-free operation: Because our portable pcp compressor does not require the addition of oil or the circulation of cooling water, it eliminates the need for an additional water pump and simplifies the operation. The high-capacity fan integrated into the compressor can significantly improve cooling efficiency while also allowing the compressor to continuously fill your air gun. This will save you a significant amount of energy in the future.
Power Supply Options: 12V DC in the car or 110V AC at home: Our pcp air compressor has two different power supply options.
The air compressor can be powered by a 12V car battery, as well as by a 110V household alternating current power source. This will increase the utility of this air pump because you will be able to use it anywhere.
The high-pressure air compressor can easily achieve 300Bar/4500Psi/30Mpa, which is sufficient for most air guns’ air pressure requirements. It also has an auto-shutoff feature. In addition, it performs the extremely useful function of regulating the inflation pressure of the tire. When the preset air pressure is reached, the filling process can be stopped automatically while the cooling fan continues to run. The automatic shutdown will be delayed by approximately 6 seconds in order to ensure that there is sufficient air pressure.
An 8MM female threaded connector is used for the inflator nozzle, which allows for quick connection and disconnection. An oil/water separator is also included. It is compatible with PCP airsoft/pistols and paintball cans, among other things. The oil and water separator on the hose is a re-usable piece of technology. It has the ability to efficiently filter out oil and water from the air and produce clean and dry high pressure air.
This unit has just been delivered. Set the pressure to 3000 psi and attach the hose plug to the pressure regulator. As expected, the unit was pressurized. Pressure has been released, and the pressure dial has been reset to 4500. However, when the pressure reached a level in the vicinity of 4500, the pressure disk exploded. When I searched for a different but similar unit on the internet, I came across a posting that demonstrated how to replace the burst disc. I replaced the disk with one of the spares that came with it. Set the pressure dial to a little bit higher than 4000 psi. The unit performed exactly as expected. I gave the unit three out of five stars. It does work, and they include some spare parts, but the documentation that comes with it does not explain what the spare parts are intended to do. What to do in the event of a burst disc is not addressed at all in the user manual. Additionally, I am unable to locate a source for replacement burst discs or spare parts. The burst discs are small, thin brass discs with a diameter of approximately a quarter inch.
***********************************************************************************************************************************************.
The seller was quick to respond and get in touch with me. We’ve had some pleasant communications, and I’ve made some suggestions about where some minor updates to their documentation could be made. The seller also offered to send me a few replacement burst discs as a gesture of goodwill. According to the manufacturer, two discs are required to reach the maximum pressure of 4500psi. I’ll give it a shot on my next fill.
