6 a b c d e “The air random orbital sander is lightweight and portable, and it can be operated with just one hand.
The built-in regulator is used for speed control, and the maximum free speed is 10000 RPM.
Because of the dust suction system in this handy air sander vacuum, there will be no more heavy dust.
In the automotive industry, this dual action sander is used for rough grinding, semi-fine grinding, grooving and cutting, as well as grinding and grooving and cutting on car bodies, furniture, metal products, and other components.
You will receive the following items: 1 x Air Sander, 1 x Trachea Quick Connector, 1 x Hose, 1 x Dust Bag, 1 x Wrench, 7 x 240 # Sandpaper, and an instruction manual.
Specifications.
Aluminum Alloy + Plastic are the materials used.
Sanding Pad Diameter: 6″ (150mm.
10000 RPM is the maximum speed available for free.
90 PSI is the maximum pressure.
Dimensions: 5.9″ x 3.9″ in size (150 x100mm.
Air consumption is 350 liters per minute.
The diameter of the pendulum is 1/4 inch..
Hose length is 39.3 inches” (100cm.
6.3 bar is the working pressure.
Noise level: 100 decibel.
Included in the package.
1 x Mini Dual Action Air Sander with a sanding dis.
1 x Quick Connector for the Trache.
7 sheets of 240# sandpape.
1 x Flexible hos.
1 x Wrench (optional.
1 x Dust Bag (optional).
1 x Instruction Manua.
NOTE.
1. Before using the grinding wheel, please inspect it to ensure that there are no flaws in the protective cover.
2. Before replacing the orbital random sander wheel, make sure that the valve is closed.
Following completion of work, close the pipe valve first, followed by the grinder and pressure relief valves, and finally the grinder switch is removed from the circuit.
4. Please keep the grinding wheel dry and avoid storing it in a humid or open environment.
I am extremely pleased with my purchase. This sander is significantly lighter in weight than my electric sander. On the strength of the air pressure, it moves smoothly. It’s a world of difference for my shoulders. The surfaces appear to be in good condition. As an added bonus, I now always use it after I finish up with the air compressor to sand a few unfinished pieces. In order to avoid wasting energy, we used up all of the leftover air.
