【Dimension. 1800mm/70.87″ in length, 19mm/0.75″ in width, 1mm/0.04″ in thickness, and a spring outer diameter of 67mm/2.64″ in length, width, and thickness.
Installation Instructions For.
Inner mounting type is a hook, and the outer mounting type is also a hook.
High-quality and long-lasting material. Its metallurgical quality (high purity and uniformity), surface quality (strict control of surface defects and decarburization), and precision shape and size make spring steel (60Si3Mn) a superior material for springs.
This is the chrome-plated spring that is responsible for returning the sleeve to the top of the drill after it has been drilled. Compatible with a variety of vacuum cleaner coil springs, volume tube coil springs, safety coil springs, and other similar devices.
1PCS x Drill Press Spring is included in the package.
Spring for the MroMax Drill Pres.
Specification.
Spring steel is the material used (60Si2Mn.
Thickness of the material: 1mm/0.04.
Materials have a 19mm/0.75-inch width..
The length is 1800mm/70.87 inches..
The outer diameter of the spring is 67mm/2.64 inches..
Hook is the type of mounting used on the inside of the frame.
Type of mounting on the outside: hoo.
Surface treatment: There is no special treatment, but the surface has been chemically blackened.
Description.
1. The sleeve return spring of the drilling machine is a good substitute for many of the sleeve spring drilling machines that are currently in use. A chrome-plated spring that can be used to return the sleeve to its original position after the drilling process is complete.
2. Pay close attention to the chemical blackening, as the product’s performance forms an oxide film, which isolates the air and prevents rust from occurring.
When installing the spring, keep an eye out for potential hazards. Please do not loosen the wire that is holding the spring in place. When installing the spring, insert the fixed wire directly into the spring, and the wire will slide out of the spring as the spring is loaded.
Contents of the package.
1 x Drill Press Spring (one piece)
