Each Item Has a Separate Price. The maximum pressure for a pneumatic vibrator is 80 psi. Steel is used for the construction of the housing. Mountin. Plate is available for purchase separately. Mining, chemical plants, plastics, manufacturing, foundries, and paper mills are examples of applications. Vibrator Type: Piston Duty: Continuous CFM @ 80 PSI: 5 dB @ 80 PSI: 91 Continuous CFM @ 80 PSI: 5 dB @ 80 PSI: 5 dB @ 80 PSI: 5 dB @ 80 PSI: 5 dB @ 80 PSI: 5 dB @ 80 PSI: 5 dB @ 80 PSI: 5 dB @ 80 PSI: 5 dB @ 80 PSI: 5 d. The outlet port is 9/16″ NPT and the inlet port is 1/4″ NPT. The CFM at 60 psi is 4 and the outlet port is 9/16″ NPT. 2″ is the overall width of the piece.
Approximately 4-1/2″ in length and 3-7/8″ in height overall. Foot Speed @ 80 psi: 11, 000 vpm during installatio. 1A326 is the number of the exhaust pipe. The speed at 60 psi is 9000 vpm. Strength of the force: 242 l. 400 pound weight capacity for the bi. USA is the country of origin (although this is subject to change).
The vibrator arrived without any issues, and the transportation was smooth; however, the device does not function properly, in addition to being too small and not producing enough vibration for my needs. I have requested a refund, and so far, no response has been received. The product description does not match the product itself; it connects to the compressor but does not produce enough heat; it is also too weak, despite the fact that the description states that it should be stronger; the price of the compressor is reasonable; therefore, it is not the fault of my machine, but rather the fault of the vibrator.
