Name of the product: Drill Press Sprin.
8″ Drill Presses are compatible with this product.
Max. D*T: 1.4″; Color: Steel Gray; Total Size: 35 x 8mm / 1.4″ x 0.3″ (Max. D*T).
Metal is the primary material.
The Drill Press Spring is 91g in weight and comes in a package of two.
Do not allow the spring to be opened. Alternatively, if the spring has been tightened repeatedly, insert the middle into the groove and loosen the fastening when the spring is fastened on the inside of the spring.
Otherwise, use the retainer pliers to screw the axle center into place.
The balance spring must be reattached to the chain slot, which is necessary in order to remove the horizontal shaft from the machine.
Every spring lasted approximately 5-10 minutes.
