It runs 50 percent longer with a brushless motor.
The Pcck607 1/2″ drill/driver has a powerful motor that can do a lot of work with very little stalling.
The drill/driver has two speeds: 450/1, 800 RPM.
The Pcck647 1/4″ impact driver transmission has 1, 400 in-lbs. of torque, which is enough for big fastening jobs.
The impact driver transmission can go up to 2, 700 RPMs.
There are two 20V tools in the Porter cable PCCK619L2 20V 2-Tool Brushless Combo kit: a Pcck607 20V Brushless drill/driver and a Pcck647 20V Brushless impact driver. Brushless motors give you 50% more run time. In the 1/2-inch drill/driver, there is a powerful motor with 370 UWO of power for heavy-duty jobs that don’t stall. The two-speed transmission has 450/1, 800 RPM for speed when drilling and fastening. When you’re done drilling, you can switch to fastening mode without having to change your clutch setting. The mode collar lets you do this. The 1/4-in impact driver motor has 1, 400 in-lbs. of torque, which is enough for big fastening jobs. The transmission has 2, 700 max RPMs, which is enough for speedy fastening jobs. 1/4″ Quick Change he. The changes are quick and easy. These two tools are small and lightweight, which makes them easier to use in small places. For two years only, Porter CABLE is backed by a limited warranty from them. Also comes with: 1) Pcck607 Brushless drill/driver, 2) 1.5Ah batteries, and 1) charger.
Is this the only thing I see. A two-piece set of Porter Cable BRUSHLESS tool.
High Power Batteries and a charger for about $130 in a bundle. That’s what I mean.
To buy two batteries and a charger, you have to pay for them on your own. This was last November.
They are also cheaper than the old brush models, which cost more. came out with theirs.
On sale, it was $700. For people who don’t know what Brushless is, they have a video.
More than 10,000 hours of use, 2X the battery life, and more torque.
The only real difference between this PCCK619L2 and the PCCK602L2 is that the PCCK602L2 has a bigger screen.
PCCK619L2 has the PCCK647 impact driver instead of the PCC640 and PCC640.
There is a difference in price: The PCCK602L2 costs almost $50 more. What. A lot of people are excited about the PCCK602L2.
With the little red bag and a few screws.
So, when it comes to the tools, they’re huge monsters, too. The impact driver can do 1,495 in-lbs of work at one time.
This word means “torque” (125 ft-lbs). The drill has a 1/2 inch chuck instead of the usual 3/8 inch chuck, so it can drill bigger things. Then, too.
The drill now has a new one-click quick lock setting for drilling, as well as the usual 22 different options for setting the drill.
There will be no more having to click through all the different settings to get to the lock. There will be just one.
Click to start drilling, and the variable settings stay the same as they were before you did it. I find that very useful.
Both have a bright LED that stays on for 20 seconds after you let go of the button.
As we said earlier, both have the bigger battery, 1.5 amp-hr, instead of the smaller one, 0.5 amp-hr.
In this case, 1.3.
It’s possible that they might be too powerful. So, I kept my old clothes.
Rockwell’s 18 volt combo kit is good for light work. This is what you need. Most likely, this is the best I can figure out.
the best dea. A 20V Brushless Combo kit is what I’m going to buy. That’s my story, and I’m going to keep it.
It:)
