[SIZE]: The shank is compatible with the majority of grinders and rotary tools on the market.
[MATERIAL. It has a high hardness, excellent wear resistance, and impact resistance because it is made of diamond particles that have been electroplated. Diamond’s high hardness allows it to process a wide range of materials, making it ideal for all types of detail work.
[APPLICABLE MACHINE] – [APPLICABLE MACHINE. Electric grinders, engraving machines, pneumatic engravers, and flex shaft grinders are all examples of machines that can be equipped with this accessory. The high-speed rotation of the diamond burrs is ideal for deburring, shaping, chamfering, polishing, and grinding of molds, among other applications.
[APPLICATIONS. Grinding high-hardness metals such as cemented carbide, quenched or nitridated tools, and alloy steel is possible with this machine. In addition, nonmetallic materials with a high hardness and low brittleness can be used, such as glass, ceramics, and jade, among other things.
In order to prevent emery from falling off quickly, the rotation speed should be as high as possible, which generally requires a linear speed of not less than 10-20m/s; please select the appropriate grit and head shape according to the raw-materials and process, which can effectively improve work efficiency and quality.
A low-speed test should be performed on the new tool before it is put into service. If there is a problem with the jumping, do not continue to use it. A smooth running tool must be adjusted in order for the object to be smooth; otherwise, the object will be unsmooth and the tool may be prone to breaking at the handle.
Modifications are made by gently tapping the tool handle while it is rotating at high speed with a small wrench attached to a chuck until the tool is stable. It is strictly forbidden for the electronic machine to make a knocking sound. The method of adjustment is to loosen the chuck, change the angle of the tool, or extend and retract the tool a small amount.
The use of drip water or placing it in a pool for cooling treatment is recommended in order to increase tool utilization and object yield. Otherwise, the diamond will graphitize as a result of overheating, which will cause it to wear out sooner rather than later.
Please use gentle pressure and avoid shaking. Grinders are used to grind workpieces down to size. If you use too much force, the grinding powder will be difficult to remove from the surface.
During use, it is possible that flying chips will be generated. When using it, please use jigs, non-slip finger cots, and safety glasses to prevent injuries.
The perfect tool for rounding rocks prior to tumbling.
Diamond finish that is extremely durable.
