The drill press quill return spring has a high degree of elasticity and is therefore difficult to break.
If your drill press already has a quill spring, this metal spring will work well as a replacement for many of those already in use. It is designed to return the quill to its original position at the top of the drill press after you have finished drilling.
The wire of the hoop spring must not be removed; otherwise, the spring will not be able to be attached.
The balance spring must be reattached to the chain slot, which is necessary in order to remove the horizontal shaft from the machine.
All types of vacuum cleaner coil springs, volume tube coil springs, and safety belt coil springs are used in this application.
Specification.
Name of the product: Drill Press Sprin.
Dimensions: 4.7 x 0.8cm / 1.85″ x 0.31″ (max.D*T) in total.
1.54 m/60.6 ft in length “/ 5.05 m .
0.03 inches by 0.31 inches by 60.63 inches Dimensions: 0.7 inches by 8 inches by 1540 millimeters “(T*W*L) is an abbreviation for “time, work, and leisure..
Dark Gray is the color of choice.
Metal is the primary material.
Net Weight (in grams): 97.
2 x Drill Press Springs are included in the package.
