Buy 7 Pieces Konfor 4 Inch Wet Diamond Polishing Pads for Grinding Granite Marble Concrete Stones

7 Pieces of 4″ Wet Pads (included) (Include Grit 50, 100, 200, 400, 800, 1500, 3000.

Diamond powder is contained within the material.

Granite, marble, and concrete are all good choices.

Flexible Velcro-backed material with a thickness of 3 m.

4500 RPM is the maximum speed. Neve uses it in conjunction with a high-speed grinder.

For polishing granite, marble, and concrete, wet diamond polishing pads are the most popular choice.

Aggressive, with a strong finish to the gam.

3.It is flexible enough to be used for polishing OG as well as straight edges.

4.Professional grade wet pads, which are used by a large number of stone fabricators.

5.Only for wet us.

6. Diameter: 4 inches (100mm).

Included in the package.

1 x Polishing Pads with a Grit of 5.

1 x Polishing Pads with a 100-grit surfac.

1 x Polishing Pads with a 200-grit gri.

1 x 400-grit Polishing Pads (included).

1 x Polishing Pads with an 800 grit ratin.

1 x 1500 grit Polishing Pads (for polishing purposes.

1 x Polishing Pads with a 3000 grit rating.

INSTRUCTIONS.

Attach the rubber backer to the variable speed angular hand grinder with a hex wrench.

Attach the Velcro loop side of the polishing pad to the Velcro loop side of the backer so that they form a tight bond.

Check to see that the pad is centered on the backer pad before proceeding. If the polishing pad is not centered properly, it will reduce the life of the polishing pad.

WHEN IT COMES TO THE BEST RESULTS AND YOUR SAFETY.

When operating the grinder, it is recommended that you wear protective eyewear and gloves. When you are operating, you should also add a small amount of water to the surface.

Leave a Reply

Your email address will not be published. Required fields are marked *