Any Astro Pneumatic Model #1114 or Model #118 Air Ratchet Wrenches will work with this adapter.
Matco Model #s SE628 and RL625 are compatible with this product.
Ingersoll Rand IR103A, IR104, and IR104B are all compatible with this model.
Parts that are competitively priced and of equal reliabilit.
The Astro Pneumatic Tool Company is a 1/4-inch pneumatic tool manufacturer “Astro 1114 and 1118 Air Ratchet Wrenches are equipped with an anvil kit for industrial use. Matco Model #s SE628 and RL625 are also compatible with this product. Ingersoll Rand IR103A, IR104, and IR104B are all compatible with this model. Parts that are competitively priced while maintaining the same level of reliability.
So I ended up with a broken anvil on a less expensive 1/4” anvil “a ratchet made of ai. I was made aware of the fact that anvil kits were available for some people. A single-pawl Northern Industries was the subject of my investigation. After receiving the kit, it looked exactly like the one that had been damaged. So I tried swapping them out, but it didn’t work at all.
Following some investigation and a couple of removals and installations. The anvil body turned out to be a match, as I discovered. However, the teeth on the outside were different from my original.
Following the replacement of “the guts. In addition, grease and air tool oil are used for lubrication.
The device continues to function as it did before it broke.
As a result, if you have a non-branded tool.
After that, the anvil is snappe.
I recommend that you keep your old one. Putting the pieces together and calling it a day.
It should be noted that this was not a mini ratchet.
In fact, I’m going to try the same procedure on a broken double pawl one that I have.
