Please keep in mind that the router bit arbor is not threaded and that the inner hole diameter is 7/8″-5/8″. (washer included). We also attached a set of lock ring nuts and a wrench to ensure that any grinder or polisher with a 5/8″ hex drive would work properly “This router bit can be used with a spindle with 11 threads.
(a) 1 piece of V20 (3/4 inch thick) “/ 20mm) for 20mm / 3/4 Inch high / thick granite marble concrete quartz glass countertop / vanity top edge bullnosing Diamond Brazed Router Bit to do Full shape bullnose on granite marble concrete quartz glass countertop / vanity top edge bullnosin. This router bit’s inner hole measures 7/8″ to 5/8″ in diameter. It is compatible with a grinder or polisher that has a 5/8” drive “-11 Thread spindle is a thread spindle that is used to thread a thread. Important Reminder: When using this product, please make sure that the speed of your grinder or polisher is less than 5000 RPM.
(b) One pair of Lock Ring Nuts and a wrench set (the pair of lock ring nut is required in order to attach the router bit to your 5/8” drive shaft) “Thread spindle grinder and polisher (11 thread spindle grinder and polisher). (c) 1 piece of 4″ aluminum Velcro Backer / Pad Holder (5/8”-11 thread arbor) with a velcro backing and pad holder.
(d) One piece of four “Using a diamond turbo grinding cup wheel as a working layer (attaching it to an aluminum backer before using it) for stone concrete is recommended. (e) One piece of four “Glaze Buffer for the Profession (it brings mirror like polished result to stone granite marble).
4 diamond pieces (f) 8 pieces of diamond 4 “The following polishing pads are recommended: 2 X Grit 50, 1 X Grit 100 200 400 800 1500 3000, and 1 X Grit 100 200 400 800 1600 3000.
FREE SHIPPING (United States. Please keep in mind that the router bit arbor is not threaded and that the inner hole diameter is 7/8″-5/8”. (washer included). We also attached a set of lock ring nuts and a wrench to ensure that any grinder or polisher with a 5/8″ hex drive would work properly “This router bit can be used with a spindle with 11 threads. The following items are included in this auction/package: (a)-(f). (a) 1 piece of V20 (3/4 inch thick) “/ 20mm) for 20mm / 3/4 Inch high / thick granite marble concrete quartz glass countertop / vanity top edge bullnosing Diamond Brazed Router Bit to do Full shape bullnose on granite marble concrete quartz glass countertop / vanity top edge bullnosin. This router bit’s inner hole measures 7/8″ to 5/8″ in diameter. It is compatible with a grinder or polisher that has a 5/8” drive “-11 Thread spindle is a thread spindle that is used to thread a thread. Important Reminder: When using this product, please make sure that the speed of your grinder or polisher is less than 5000 RPM. (b) One pair of Lock Ring Nuts and a wrench set (the pair of lock ring nut is required in order to attach the router bit to your 5/8” drive shaft) “Thread spindle grinder and polisher (11 thread spindle grinder and polisher). (c) 1 piece of 4″ aluminum Velcro Backer / Pad Holder (5/8”-11 thread arbor) with a velcro backing and pad holder. (d) One piece of four “Using a diamond turbo grinding cup wheel as a working layer (attaching it to an aluminum backer before using it) for stone concrete is recommended. (e) One piece of four “Glaze Buffer for the Profession (it brings mirror like polished result to stone granite marble). 4 diamond pieces (f) 8 pieces of diamond 4 “Granite, concrete, marble, stone, and travertine polishing pads are available in the following sizes. 2 x Grit 50, 1 x Grit 100, 200, 400, 800, 1500, 3000, and 1 x Grit 3000.
