Buy Doc.Royal JT-26 Digital Dust Collector Artificer Room Vacuum Cleaner 370W for Dental Laboratory, Industry

370 watts of powe.

17 kPa is the maximum pressure.

The amount of airflow is 70m3/h.

-9.8 kpa is the maximum vacuum.

Noise intensity at its maximum: -60d.

Features.

1. This dust collector is primarily used in an industrial environment, such as a manufacturing facility. It has the ability to collect all of the dust in the air with ease, thereby protecting the environment from pollution.

2. The dusct collector is housed in a rectangular box with four corners. Design that is both good and simple. It is simple to perform routine maintenance on the motor. Alternatively, it can be placed under the dental laboratory bench or in other locations where it will be extremely convenient to collect dust.

3. The collector motor is equipped with specifications that include high power, high efficiency, low noise, and low cost.

Specifications.

Voltage: (A) 220V/50Hz with a 10% tolerance, (B) 110V/60Hz with a 10% toleranc.

370 watts of powe.

17 kPa is the maximum pressure.

The amount of airflow is 70m3/h.

-9.8 kpa is the maximum vacuum.

-60db is the maximum level of noise. Specified dimensions are 35 x 20 x 35 cm.

Content.

1 x Digital Dust Collector with additional accessorie.

What is the best way to use it.

1. Open the box door and check that the filter bag is in the proper position.

2. Connect the soft plastic tube to the wind mouth using the rubber connector.

3. Turn it on and adjust the frequency to a reasonable level to make it function.

Notes.

1. This product should function properly when connected to a high-quality power supply cable.

2. Take care not to place the power supply cable in close proximity to any sharp objects.

3. Please remember to disconnect the cable from the power supply when you are no longer on duty.

3. Remove the dust-collector bag from the machine every day.

5. Please keep in mind that the filter bag should be cleaned every 3-6 months.

6. Replace the carbon brush and air filter every 400 hours, as well as the carbon brush.

7. Please remember to remove the optional multi-direction castor and dust exhaust from the dust collector before using it. These items can be found inside the dust collector’s front door.

I’m overjoyed to have one at long last. I’m pleased with the product, and the seller was a pleasure to work with. Thank you so much for your help!

Leave a Reply

Your email address will not be published. Required fields are marked *