Compressed air flows from your compressor to the end-users through your compressed air piping. There are so many different kinds of compressed air pipes on the market today and you need help to do compressed air system installation. Black pipe is the most commonly used pipe recommended for compressed air systems.
Because of the condensation that is unavoidable with compressed air systems, iron compressed air piping is prone to corrosion. Avoid Using PVC. PVC piping is NOT recommended for use as compressed air piping. There are many better, safer materials than PVC that can be used for compressed air piping.
Owners of compressed air piping systems tend to focus on the compressor and think of the piping as less of a concern. The purpose of compressed air piping systems is simple: to deliver compressed air to where it is needed. Metal pipes have been around for much longer than their plastic equivalents, and traditionalists prefer them when it comes to piping compressed air distribution systems.
best air compressor lines Related Question:
What is the best compressed air line?
A great choice for compressed air piping is stainless steel because it is strong and resists corrosion. Like with copper, corrosion resistance in stainless steel piping produces a cleaner, more consistent stream of air.
Is PEX OK for compressed air?
A: No, PEX pipe is not intended for compressed air applications.
What type of pipe is used for compressed air lines?
Black Pipe Black pipe is the most commonly used pipe RECOMMENDED for compressed air systems. It is readily available, it is strong and durable and most people are familiar with how to install it.
Is it OK to use PVC for air compressor lines?
However, using PVC pipe in any compressed air application is extremely dangerous and NOT recommended by multiple associations and manufacturers. PVC piping is often used to transport liquids, mainly water, for multiple applications.
Can galvanized pipe be used for air lines?
Galvanized piping is commonly used for water distribution and for general plumbing. However, it is not recommended for use with compressed air. Galvanized coating resists moisture in compressed air but pieces of the coating will flake off and end up in your tools.
Can I use ABS pipe for air compressor lines?
ABS, PE and HDPE plastics are appropriate for use in compressed air piping systems and have some benefits over metal. The materials are lightweight and easy to work with, requiring no special bracing or supports. Plastics can be easily cut and fit using standard tools and can be glued together rather than welded.
Can I use SharkBite for compressed air?
SharkBite, part of RWC’s family of brands, now offers a new range of brass push-fit fittings and anodised aluminium pipe to simplify small to large commercial and industrial compressed air installations.
Are SharkBite fittings good for air?
Can I use SharkBite fittings for anything other than potable water and radiant heating (e.g, air, gas, oil, etc.) applications? No. SharkBite fittings are only certified for potable water & radiant heating installations.
Is PEX rapid air?
Check out Rapidair, it’s basically the same pex with an aluminum core and designed for the job of handling compressed air. The aluminum core makes the tubing a little stronger but also helps it to retain it’s shape better You can straighten it out or bend curves and it will hold it’s shape so it looks neater.
How far can you run an air compressor line?
Typically, air hoses will be either 50- or 100-feet long, with a few exceptions. Most people will go for the 100-foot option because it allows them to maximize their distance from the air compressor.
Can I use CPVC for compressed air?
No, PVC and CPVC pipe should not be used for compressed air lines. Here is what the manufacture has to say about it. WARNING! The use of plastic piping with compressed air or gasses can result in severe bodily injury or death.
What can I use for air line in shop?
Use copper instead. It’s available at most hardware stores and home centers. Solder it using the same fittings as you would for water supply lines. If you don’t want to solder, use galvanized or black steel pipe.
How many PSI will PVC hold?
Most smaller sizes of PVC pipe are rated for between 300-600 psi, but that is only if the pipes are new and the system is perfectly sealed. As we mentioned before, it is extremely difficult to make a PVC system airtight. Also, due to the fact that it is plastic, PVC pipe becomes brittle with age.
How much pressure can PEX?
PEX-a pipe can withstand a burst pressure of around 800 psi (almost two times the requirement for ASTM F876, the standard specification for PEX tubing). So neither the pipe nor the fittings are weak points, making for an extremely high-performing system in domestic water and hydronic piping applications.
What is copper tubing used for?
Copper tubing is most often used for heating systems and as a refrigerant line in HVAC systems. Copper tubing is slowly being replaced by PEX tubing in hot and cold water applications. There are two basic types of copper tubing, soft copper and rigid copper.
