An electric pump is better than a manual pump in almost every way, with many of them available for less than $150. However, just like inflatable SUPs, there are a ton of electric pumps to choose from. Dependability: While the pump looks very similar to a lot of other inflatable SUP pumps on the market, ERS has actually engineered the internals to meet the high demands required for pumping up inflatable SUPs. Lastly, all of the above electric SUP pumps have a feature for deflating your paddle boards as well, ensuring that it’s empty and ready for packing once you’re ready to head home.
It’s the most exhausting part of the day! So unless you’re really in it for the cardio and shoulder workout, it would be a big step up to consider an Electric Paddle Board Pump. Be sure to verify that the electric SUP pump you are considering is compatible with your inflatable paddle board. Tower Paddle Boards not only makes inflatable paddle boards, but they also make electric pumps to go with them.
BEST 12V ELECTRIC PUMPS FOR SUP. I have done extensive research on these pumps and used them all myself many times over. These are the electric pumps that work best for inflatable paddle boards right now. NIXY VENTUS UNIVERSAL ELECTRIC PUMP. The Ventus electric pump was designed by Nixy Sports, a known and respected inflatable SUP company.
best air compressor for paddle board Related Question:
How much PSI do you need for a paddle board?
The recommended PSI for an inflatable paddle board is 10 to 15 PSI, with the highest recommended pressure being 25 PSI. The average inflatable paddle board rider will inflate their board to only 12 PSI, sometimes more.
Do you need a special pump for a SUP?
There are actually a few different models of K-Pumps for sale but this K20 is the only one designed specifically for inflatable stand up paddle boards. If you are cost conscious, then you will like that this electric iSUP pump has a lower price at NRS than the Bravo pump listed above.
Can I use tire pump for SUP?
You shouldn’t do it! There are electric pumps designed specifically for sups. An air compressor, compresses the air and creates moisture. Having moisture in your sup is a good way to ruin it!
Can you overinflate a SUP?
If you go over the stated limit, you risk ‘popping’ your board and doing real damage. I find the K-Pump to be the best high-pressure pump to use or else a good electric pump. However if you are using an electric pump make sure that you do not inflate it over your boards PSI limit.
Is higher PSI better for SUP?
The best inflatable stand-up paddle board PSI level is anywhere from 10 to 15. Most people inflate their board to about 10 to 12 PSI. A higher PSI will help if you are riding in cold or choppy water. If you need a bit more stability, try increasing the PSI of your board as well.
Why does my paddle board sink in the middle?
This bend is usually around the mid-point of the board where a rider stands. With too little air deflection is exacerbated and your board will resemble a floating banana. Your SUP’s ‘cockpit’ area will sink below the water line and the nose will raise and begin pushing water.
Why does my paddle board sink?
Board weight. Too light of a board, and you will sink into the water if you overload it. If your board is too heavy, you’ll struggle too much trying to paddle and maneuver the extra weight that it may result in you falling a few more times if not careful.
Can you use any pump on a paddle board?
Electric pumps are a great way to quickly inflate your paddle board. The best pumps have a maximum pressure setting to help prevent over-inflation. Rechargeable pumps can be used when you don’t have power nearby. 12V and 110V pumps are available that can inflate multiple boards before needing to cool down.
Are paddleboard pumps universal?
This inflatable SUP pump is compatible with all Halkey-Roberts and Bravo valves which means this pump can be used on just about any inflatable SUP available on the market. However, if your inflatable SUP does not have these valves, the 12V Electric Pump comes with five universal adapters to fit your SUP.
How many gallons of air do you need for a paddle board?
One gallon is about . 14 cubic feet. A 12′ X 36″ X 6″ isup is about 18 cubic feet. Just to fill it with air would take about 10 fills of the tank. to bring it to 20 pounds would take about 30.
Should I deflate my paddle board after use?
Many people ask whether they can leave their board inflated instead of deflating it after each use. The answer is yes you can BUT please store it away from the elements, in a cool area out of direct sunlight and ideally off the ground.
Can a paddle board sink?
The Verdict – Hard boards can be damaged, however, never to the point that they can not still support your weight and be paddled. They can not deflate, they can not fill with water and sink, and can always safely get you to shore if damaged while paddling.
How do I know if my paddle board is fully inflated?
The pump gauge will not register a psi until it gets to at least 7 psi. Inflate paddle board and you will begin to visibly see the board inflating. The last 30-40 pumps will be fairly difficult. When you think the board is fully inflated, take a minute break and then give it 10-20 more pumps.
How long does it take to pump up paddle board?
A. The length of time it takes to inflate your SUP will depend on the type of pump you are using. With a regular hand pump it will take anywhere from 6 – 10 minutes depending on how fast you pump. With a good SUP electric pump it will take 6-8 minutes depending on the size of the board.
How many Litres of air are in a paddle board?
All pumping times and amounts are dependent on the size of board (length, width and thickness) which equates to the volume of air you will be pumping. Many of the popular boards run from 190 to 220 liters, but we do have smaller boards down to 160 liters and some big, beefy boards at 370 liters.
