You will definitely have to take your time with a 2 gallon tank.
I am considering painting my entire truck with bedliner. I bought a cheapie 3 gal 1/3hp 1 cfm harbor freight compressor. I will probably run into a lot of situations where the compressor is handy, specifically when using air tools, blowing on stuff, etc.
You can spray it with lower pressure settings if thinned more. We have the most versatile spray bed liner that allows you to achieve a broad range of textures and finishes for your project needs. You can achieve virtually any texture from 25 to 55 psi.
best air compressor for raptor liner Related Question:
How big of an air compressor do you need for raptor liner?
What size air compressor do I need to spray RAPTOR? A 6 HP compressor that generates 150 PSI line pressure should provide sufficient air supply, but is dependent on the application equipment / gun (Shultz type or gravity feed HVLP) used to apply the RAPTOR.
What PSI should I shoot Raptor liner with?
Spraying RAPTOR Attach the RAPTOR bottle to the U-POL SCHUTZ GUN 3. Adjust the air pressure on your compressor to 40-60 PSI 4.
What size air compressor do I need for spray in bedliner?
s Liner Compressor Settings. You need a minimum of 7 cfm capacity and 25 psi at the gun. You do not want to exceed 55 psi at the gun. You can achieve virtually any texture from 25 to 55 psi.
How long will Raptor liner last?
Shelf Life 9 months in unopened containers. Lids must be replaced after every use. Simply FILL the Raptor coating bottle with 250nl of hardener, replace cap and Shake contents vigorously for at least 2 minutes. SHOOT.
How long does Raptor last once mixed?
Its not very long I would reference the raptor liner website. Do you find this helpful? If I remember correctly, you have at least 10-15 minutes working time.
Can you spray Raptor on raptor?
Yes, RAPTOR can be used for both.
What can I use to clean my Raptor liner gun?
Clean gun, equipment and overspray with a lacquer thinner or other acetone based solvent before RAPTOR™ is fully cured. RAPTOR™ Bed Liner and Protective Coating is a very durable coating.
How much Raptor liner do I need?
As a general rule of thumb, one gallon should be sufficient for a 6-foot pickup truck bed. One gallon of RAPTOR will cover approximately 85 square feet of two coats, each about 7-18 MIL thick per coat when spraying. While rolling, the product will cover about 65 square feet over two coats.
How many liters of Raptor liner does a full truck have?
The NEW 5 Liter RAPTOR Pails are ideal for large areas like trailers, floors, heavy equipment and full oversprays.
Does Raptor liner hold up?
Raptor liner is durable and tough paint-on protective coating with various uses. It forms a barrier that withstands all types of weather and physical abuse, and come in an all-inclusive kit that contains almost all of the materials needed for vehicle enthusiasts to protect their investment.
Can you spray Raptor liner upside down?
No it will spill out the hole in the top of the gun. You have to jack it up and try your best at a angle.
How much does it cost to Bedline a whole truck?
The process doesn’t come cheap, however. The total body spray’s cost at Line-X varies, ranging generally from $3,000 to $5,000. That compares with $450 to $550 for a standard bedliner spray, Liveoak says. Still, it should last the lifetime of the vehicle, she adds.
Can you Raptor coat Aluminium?
How do you prepare aluminium for a RAPTOR application? Clean the aluminium with a wax and grease remover and sand with P180 grit sandpaper. Apply one to two coats of ACID#8 Acid Etch Primer (ACID/AL) and use GRIP#4 Universal Adhesion Promoter (GRIP/AL) for hard to reach areas.
Can Raptor liner be painted over?
Yes, you can paint over the Raptor liner. UPOL suggests that you wait for 24hrs to cure, scuff the area and clean before adding any topcoat.
Is Raptor paint flexible?
RAPTOR’s versatility makes it perfect for almost any application. Spray or roll RAPTOR on high traffic areas; it’s scratch and stain resistant and easy to clean. Its flexible formulation can handle impacts without cracking, making it perfect for its most popular application as a truck bed liner.
