To get the most out of your air compressor you’ll want to consider investing in a series of attachments and accessories. Auto spray paint guns are useless without an air compressor, which means you should ensure that you have a spray gun that can withstand the pressure, and an air compressor that can deliver the kind of power you need. You should be concerned with keeping your air compressor and air compressor attachments in working order, but should you ever face issues, know that Auto Body Toolmart has the resources to help.
On your air compressor that air path probably flows through the air regulator, and then out the end of the air line to atmosphere. You will need a flexible air line or air hose to carry the compressed air from the compressor to the air tool you wish to use. By having a connector on one end of your air line and a coupler on the other end, you now have the complete method of getting the air from the discharge coupler on the air compressor to your air tool.
There are a number of ways to employ air compressor accessories in order to increase the ease of use of your compressed air system. Because we’re so invested in making sure your compressed air system is working and providing you with the power and efficiency you need, we thought we’d offer you some tips and suggestions on air compressor accessories that make the job easier. Portable air tanks work by storing compressed air generated by your main compressor that can then be applied to end-use tools when your compressor is no longer active.
California Air Tools manufactures a line of air compressors that are so quiet you can actually have a conversation or hear the radio while they’re running. Install a regulator at the end of your air hose, and eliminate those trips back and forth to the compressor. Most compressor manufacturers recommend draining the tank after every use, and most compressor owners ignore that advice without serious consequences.
Filters remove atmospheric contaminants from air at the intake to keep your compressed air system clean, and the air output pure. Advanced air compressors will have intelligent monitoring systems that read and react to air distribution pressure and air demand, using on/off controls, modulation, and variable rotational speed control in order to achieve a maximum efficiency relationship between air demand and energy consumption. So any initial benefits derived from not investing in the proper air treatment equipment for the air compressor will be offset by the excessive maintenance, repairs and damage that wet, dirty compressed air can wreak on a facility.
how to use air compressor accessories Related Question:
How do you use an air compressor for the first time?
If you are using an air compressor for the first time, it is wise to do a test run. First, turn the pressure power switch to “off.” Plug in the power cord. Now start the compressor by turning it “on.” The pressure gauge should slowly rise. Now, turn if “off,” unplug the cord and release any air in the tank.
What psi do you need to run air tools?
Most air tools require between 70 and 90 PSI. Any light-to-medium-duty air compressor can easily handle 90 PSI, but you always want the compressor to supply more flow than needed. Pro Tip: Always respect a PSI rating. If you don’t supply enough air volume, the tool won’t operate correctly.
Can an air compressor explode?
Yes, air compressors can blow up. Air compressor explosions are most commonly caused by substantial corrosion of the compressor tank. Excessive condensation leads to corrosion, and you can avoid this outcome by monitoring and servicing the compressor and its auxiliary components.
How do I spec my air compressor?
When it comes to compressors, there are three main specifications that determine performance: cubic feet per minute (cfm), pounds per square inch (psi) and horsepower. The cfm measures the volume of air that a compressor delivers. The psi indicates the amount of pressure behind the air.
Why is my compressor not filling up with air?
The most common reason behind a reciprocating compressor’s inability to reach sufficient pressure is a defective reed valve — which can exhaust air out from the air inlet on single stage models or, through the intercooler safety valve in the case of a defective reed valve on a two-stage piston compressor instead of
How do I connect two air compressor hoses?
Hose tails can be used to connect couplings to hoses, or (potentially), to connect two hoses together. It’s important to make sure that the correct hose tail size is chosen, based on the internal diameter of the hose, and then secured using a jubilee clip.
What is the difference between automotive and industrial air fittings?
As you can see, Industrial style couplers have two striped going across the fitting, whereas the automotive style only has one. On the plug, the industrial style is slightly longer and different head than the automotive.
What are pneumatic fittings?
Pneumatic fittings connect sections of pipe, tube and hose in pressurized gas systems. Compared to hydraulic fittings, pneumatic fittings are generally characterized by tighter seals and lower pressure requirements. They are common in pneumatic logic control systems and instrumentation.
How often should I oil my air tools?
Manufacturers recommend lubricating tools often throughout the day, rather than waiting until the end of the day and applying excessive amounts of oil. When done regularly, oil will coat everything and protect the air tool’s components.
Can you put too much oil in an air tool?
However, filling your compressors oil sump to the top can cause significant internal damage to your unit. When excess amounts of oil become aerosolized by the compressor’s discharge, it can cause damages not only to your compressor, but to any pneumatic tools and accessories that are hooked up to your compressor.
