Luckily, if you don’t have an onboard air setup there’s an easy recipe to follow as long as you have or can fit an A/C compressor on your engine. Last year we showed you a great way to convert a newer Jeep’s Sanden A/C compressor for onboard air in a very comprehensive article called “Endless Air,”. The downside to converting any Jeep’s existing air conditioning compressor over to onboard air is that unless you add a second compressor, you are gonna lose your A/C. Of course, A/C in any Jeep that just barely has a top is basically a joke.
That on certain year XJ’s you can unhook and modify the A/C compressor, to operate as an air compressor and use tube bumpers or the like, as the holding tank for the compressed air, and attach and air hose fitting somewhere on said bumpers. Actually I know this is possible, because Ive found it on another website, but I cannot find it again for anything.
Had a friend that used a york to supply his whole shop air. He would just idle the car and manually shut it off when the huge tank was full. A few minutes later the tank blew up, taking out the car and part of his garage.
how to turn a ac compressor into an air compressor Related Question:
Can AA C compressor be used as an air compressor?
The three most common A/C compressors converted to onboard air systems are the Sanden, York, and occasionally, the Harrison R4. Although there are some scroll-type A/C compressors that don’t use pistons to compress the refrigerant, our understanding is that they won’t work for onboard air conversions.
How much pressure does an AC compressor make?
If you think that you have an issue with your A/C system but you are not sure which component is causing the malfunction it is a good idea to hook your compressor up to a pressure gauge. An A/C System that is working properly should have 150 PSI on the high side and 30 PSI on the low side.
Are old compressors worth anything?
If you purchased or have a reliable back up compressor then sell the old compressor on any social or online auctions like craigslist for local listings or ebay for online auctions. A good rule of thumb would be $100 per 1 hp for good condition or $125 per 1 hp for great condition.
Are AC compressors worth scrapping?
While not everyone has the time, resources or ability to scrap their old central air conditioners, they are still worth money even if they are sold to a scrapyard as a sealed unit.
Do I check AC pressure with compressor on or off?
The gauge is designed to measure the pressure when the compressor is running. When it’s not running, the pressure will be higher than if the compressor were on. In other words, if the gauge reads in the “normal” range with the compressor off, then it’s actually low on refrigerant.
How much psi should a car AC have?
These pressures will vary depending on ambient temperature (temperature of the outside atmosphere), but ideally, you will want to see your low side pressure between 30-40 psi and your high side pressure between 150-175 psi.
What PSI should I recharge my AC to?
LOW pressure gauge: When the reading is between 25 and 40 psi with the A/C running, STOP. The system is fully charged and should be cooling normally. DO NOT add any more refrigerant. If the gauge is over 50 psi, you have overcharged the system with too much refrigerant.
How do I spec my air compressor?
When it comes to compressors, there are three main specifications that determine performance: cubic feet per minute (cfm), pounds per square inch (psi) and horsepower. The cfm measures the volume of air that a compressor delivers. The psi indicates the amount of pressure behind the air.
How much copper is in a AC condenser?
From disassembling one average air conditioner, you can expect to have about two pounds of copper wire, three to five pounds of #2 tubing, 10 pounds of steel, 15 to 20 pounds in the sealed unit, five pounds in the electric motor, two pounds in the power supply, and around 10 pounds of clean ACRs.
Are AC compressors recyclable?
Contact your local authorities for proper disposal procedures. Air conditioner parts may fetch a good price in your area. Take the air conditioner compressor to an EPA certified scrap metal recycling center that has the ability properly remove and recycle the refrigerants.
How much copper is in an old AC unit?
#2 copper tubing – 3-5lbs. Steel – 8-12lbs. Sealed Unit – 15-20lbs. Electric Motor – 3-8lbs.
Are old air compressors better than new ones?
You’ll get the most value from a new unit, thanks to its longer life span and quality components. A new air compressor is cost-effective because it will have better energy efficiency, and you likely won’t need to replace or repair components right away.
Are air compressors worth it?
An Air Compressor Is Cheaper than Electrical Power Tools… Sometimes. Each electric tool has to have its own motor, air tools piggyback off the compressor’s. This implies that air tools of all types are typically cheaper and also more powerful and rugged than their electric counterparts.
Do refrigerators have copper in them?
Copper – While you can’t cut the copper refrigerant lines, there’s often still a good amount of copper to be found when dismantling a refrigerator, due to the electrical components. Be sure to cut away and strip all wiring of insulation to find the valuable copper inside.
What metals are in an AC compressor?
These metals typically include aluminum, steel, cast iron, and copper. Air conditioning and refrigeration compressors generally have very long service lives, but do, eventually, break down and become unservicable.
