An air blow gun is a device used for applications requiring compressed air like removal of debris, non-contact drying and blowing. Air blow guns have an outlet port that is usually equipped with a nozzle that directs the compressed air coming out. In the United States, air blow guns should meet the OSHA regulations on compressed air blow guns.
Blowguns are fitted to a compressed air line to produce a jet stream of air, they are used to quickly and efficiently clear equipment and surfaces of debris such as dust or chips, with the nozzle directing the air flow. PCL’s safety blowguns feature a cleverly designed safety valve that reduces the output of air to 2 bar and slowly releases air if there is a blockage. Air nozzles allow the operator to control and optimise the flow of compressed air.
how to connect air compressor blow gun Related Question:
Where do you connect the air blow gun?
Pneumatic coupling The air blow gun can be easily connected or disconnected from the air supply line while it is under pressure. It consists of the quick coupling (Figure 3 left side of fitting) and a plug-in or nipple (Figure 3 right side of fitting).
What is a blowgun safety nozzle?
A blow gun is said to be “safe” when the air pressure measured at the nozzle, when the nozzle is blocked, or dead-ended, does not exceed 200 kPa. This pressure limit helps to reduce the risk of particles or air getting through the skin.
How does an air blow gun work?
Blowguns are fitted to a compressed air line to produce a jet stream of air, they are used to quickly and efficiently clear equipment and surfaces of debris such as dust or chips, with the nozzle directing the air flow.
Why should you never force compressed air against your skin?
Depending on its pressure, compressed air can dislodge particles. These particles are a danger since they can enter your eyes or abrade the skin.
What is a safety nozzle?
Energy Saving Safety Nozzles from Meech can save up to 70% of compressed air demand whilst dramatically reducing noise levels. The innovative nozzle design forces compressed air through an adjustable circular slot and then directs it at high velocity over the outside of the nozzle cone.
How do I connect two air compressor hoses?
Hose tails can be used to connect couplings to hoses, or (potentially), to connect two hoses together. It’s important to make sure that the correct hose tail size is chosen, based on the internal diameter of the hose, and then secured using a jubilee clip.
How do you use an air compressor for the first time?
If you are using an air compressor for the first time, it is wise to do a test run. First, turn the pressure power switch to “off.” Plug in the power cord. Now start the compressor by turning it “on.” The pressure gauge should slowly rise. Now, turn if “off,” unplug the cord and release any air in the tank.
What fittings do I need for air compressor?
Most standard air compressors require a plug with a 1/2-inch or 1/4-inch flow size, with the latter being more common. Just like couplers, plugs come in automotive, industrial, ARO and V-style designs.
