The reciprocating saw and angle grinder are noticeably different tools in terms of form and function. If you plan on buying a reciprocating saw or an angle grinder, you’ll also find that these two power tools differ on their list prices. In truth, you can use a reciprocating saw and an angle grinder to complete some of the same tasks.
Many people ask me whether they should buy a reciprocating saw or an angle grinder for their toolkit. Otherwise known as a disc or side grinder, an angle grinder has a similar overall shape, size, and weight to a reciprocating saw. Comparing the two I’d say a reciprocating saw is more portable but not as diverse or powerful as an angle grinder.
The angle grinder, and the reciprocating saw are two of the best power tools used for cutting both hard and soft materials. The angle grinder is best for metal cutting, and it can also cut almost any hard material such as sand, polish and grind. As we already mentioned, the reciprocating saw can cut through almost any material if it has the right blade.
Angle grinder Reciprocating saw Cutting materials Hard & tough materials Practically anything Cutting capacity Lower Greater Blind cuts Yes No Plunge cuts Yes No Curved cuts Hard to do Yes Applications Extremely hard materials cutting; General metal projects Multi-material cutting; Soft material cutting; Demolition work Level of noise Higher Lower Dust More Less Sparks More Little or no sparks Safety issues Higher Lower Price Wide range Wide range Compatibility Smaller & lighter Marginally larger & heavier 1. Similar to blind cuts, plunge cuts are difficult to perform with a reciprocating saw, but they are simple to make with an angle grinder. Therefore if you are wondering to buy whether an angle grinder or reciprocating saw to cut metal, your first choice should be the former.
An angle grinder is a hand-held power tool used for cutting. Many different types of cutting wheel can be mounted on an angle grinder but they’re all essentially grinding wheels. Our vertical bandsaw is used more for cutting shapes than cutting to length.
If you can get to the head of the bolt, use an angle grinder. You can grind the head of the bolt off and then just pound the rest of the bolt off. If you can get to shaft of the bolt before the nut, use a reciprocating saw.
angle grinder vs reciprocating saw Related Question:
Are angle grinders good for cutting wood?
The blade of an angle grinder is a grindstone that is used to polish or sharpen metal and stone; it cannot be used for cut- ting wood because it may burn and singe the wood by friction.
What is the difference between a grinder and a saw?
On a circular saw, the blade is perpendicular to the motor. On an angle grinder, the blade is parallel to the motor so that it is used sideways for grinding and sanding. This makes a big difference in what you can do with each tool and makes the look of the tool unique as well.
Can angle grinder be used for cutting?
An angle grinder is a handheld power tool that can be used for a variety of metal fabrication jobs that include cutting, grinding, deburring, finishing and polishing. The most common types of angle grinders are powered by electricity; either corded or battery powered.
Can you use a grinding wheel on wood?
More videos on YouTube Using your angle grinder on wood can be just as, if not more dangerous than metal. Some of the new angle grinder attachments are specifically designed for cutting wood and have many sharpened steel teeth, just like a chainsaw.
Can I use bigger disc on angle grinder?
Fitting a 14 inch (356 mm) cut-off disc to a 9 inch (230 mm) angle grinder will increase the edge speed excessively to at least 120 m/s (430 kmph). The photograph below shows an angle grinder with the wrong size cutting disc fitted and the guard removed.
What can’t an angle grinder cut?
The inspiration behind this creation is the natural defense mechanisms used by shells, grapefruit skins, and fish scales that makes them resistant from the attacks of various sea creatures. The material, named Proteus, cannot be cut using either angle grinders, drills, or high-pressure water jets.
Will an angle grinder cut steel?
Cutting metal, aluminium and steel with an angle grinder Metal is a hard material. You can use it for all kinds of metal, including bolts, pipes, iron, steel and sheet metal. You’ll need to use an abrasive metal-cutting disc. Secure the disc on the grinder and place the metal on a flat surface.
What is a grinder saw used for?
Angle grinders are versatile tools that can grind metal and cut tile, stucco and pavers, rout out mortar, plus they can sand, polish and sharpen. Learn to use an angle grinder to cut tile, mortar and pavers; make quick work of rust and loose paint removal; sharpen blades and cut or grind steel.
Can you use a circular saw as a grinder?
Nope. Circular saws are available that are designed to be used for cutting metal. And there are electric wet circular saws for cutting masonry and tile too. I have sanding disks for my angle grinder for wood, any kind of grinding wood metal or masonary disks or pads are available.
Can you use water with an angle grinder?
Anytime you’re cutting masonry with an angle grinder it’s a good idea lubricate the cut with water. It will cool the blade and keep the dust down.
How deep can a 4.5 inch angle grinder cut?
A 4.5 angle grinder has a blade that is 4.5-inches in diameter. This means the blade extends 2.25-inches for the center in each direction. As a result, it is not physically able to cut through 4 inch concrete. Select a larger grinder when a deep cuts are necessary, such as a 9-inch grinder.
How deep can a 125mm angle grinder cut?
All in all, 125mm angle grinders are extremely versatile tools despite their limited cutting depth of just 38 mm. While 115mm angle grinders offer a maximum cutting depth of only 30 mm, they are precise, easy to handle and lighter than larger versions.
What is arbor on grinder?
Adapting the spindle from a small “foreign” size to the American size, so we can have a wider choice of abrasives. “The “standard” spindle (sometimes called the “arbor”) thread these days on a angle grinder in the US is 5/8-11 (5/8″ diameter and 11 threads per inch).
What is the hardest material to cut?
Natural materials like diamond and sapphire are strong because of the dense lattice of atomic bonds, but they’re inflexible. With the right tools (also made of diamond), you can cut and fracture a diamond.
What material stops an angle grinder?
Instead, this Ferosafe stuff is a graphene composite material specifically designed to resist angle grinders and drills, and it’s made by a British materials manufacturer called Tenmat who have partnered up with Hiplok. Essentially this stuff disintegrates angle grinder blades!
