Access to this page has been denied because we believe you are using automation tools to browse the website. Please make sure that Javascript and cookies are enabled on your browser and that you are not blocking them from loading.
The 5/8″ – 11 Small-Angle Grinder Adapter allows a grinder cup or wheel with a 5/8″ – 11 arbor to fit a M10 x 1.25 arbor. It is a handy accessory that makes your grinder more versatile. The Adapter is ideal for use with small angle grinders.
angle grinder 5/8 adapter Related Question:
What is the thread size on an angle grinder?
“The “standard” spindle (sometimes called the “arbor”) thread these days on a angle grinder in the US is 5/8-11 (5/8″ diameter and 11 threads per inch).
What size is an angle grinder arbor?
Almost every 4 1/2″ angle grinders in the US have a 5/8″ spindle diameter size. However, on 4 1/2″ abrasive discs, the actual diameter of the arbor hole is 7/8″.
What size arbor does a Makita angle grinder have?
The 5/8″ – 11 Small-Angle Grinder Adapter (323015-A) allows a grinder cup or wheel with a 5/8″ – 11 arbor to fit a M10 x 1.25 arbor. It is a handy accessory that makes your grinder more versatile. The Adapter is ideal for use with small angle grinders.
Can you use a 4.5 in grinding wheel on a 5 in grinder?
Due to the smaller size a 4 1/2” Angle Grinder will never be as productive as a 5” Angle Grinder.
What is spindle lock on angle grinder?
“Tired of changing complex accessories for your die grinders?”Easy and quick, the spindle lock system enables you to change accessories for your die grinder easily and without a second key.
What size are angle grinder blades?
The size of the disc should have a direct bearing on your choice of angle grinder. The two most common disc sizes are 4.5” (115mm) and 9” (230mm). Grinders with larger discs are particularly well suited to heavy-duty applications, whereas those with smaller discs are ideal for finer work.
Do all angle grinders have the same thread?
“The “standard” spindle (sometimes called the “arbor”) thread these days on a angle grinder in the US is 5/8-11 (5/8″ diameter and 11 threads per inch). A wheel listed as 5/8″ will also fit most grinders, as those usually thread on the arbor.”
What is disc bore size?
The bore measurement means the size of the hole in the saw blade, this should match the boss/spigot on the saw clamping collars on your machine. If your m/c has a smaller diameter fitting it may be possible to adapt by fitting the adaptor washers supplied with the blades.
What size arbor does a Dewalt grinder have?
The arbor size of the DW756 6″ Bench Grinder is 1/2″ and is designed to accept a 3/4″ thick wheel. The arbor size of the DW758 8″ Bench Grinder is 5/8″ and is designed to accept a 1″ thick wheel.
Can I use bigger disc on angle grinder?
Fitting a 14 inch (356 mm) cut-off disc to a 9 inch (230 mm) angle grinder will increase the edge speed excessively to at least 120 m/s (430 kmph). The photograph below shows an angle grinder with the wrong size cutting disc fitted and the guard removed.
Do all angle grinder blades fit?
Angle grinders discs are interchangeable, which means you can select the specific size of disc for your grinder and the specific type of disc for the type of material you are looking to cut or grind. There is a wide range of different types of discs available for an angle grinder.
Can you put a larger disc on an angle grinder?
You can but is a very, very unsafe practice. The disc has mass and spinning mass only runs in one plane safely, so any change in the plane will rip the grinder out of your control.
What is an arbor size?
The arbor is the shaft that holds the blade. On all American stationary saws that use a 10″ blade, the arbor is 5/8″ in diameter where the blade is attached.
What is M10 grinder?
M10 is the thread pitch of 4″ angle grinder. If you have a 4.5 angle grinder you will need a different one with a 5/8-11 thread.
What is an arbor tool?
What is an arbor tool? Arbor is a precise machining tool. During the entire cutting process, it bears the important responsibility of transmitting the rotary motion and torque of the spindle to the cutting tool.
