skil 9295-01 angle grinder Related Question:
Is Skil grinder good?
I highly recommend this angle grinder. It is relatively low priced, it works well and it is very ergonomic with its handle being able to attach three different areas (right, left, top), girth not too wide to comfortably grip and (again) it is relatively light weight. Comfortable to use.
Can you change the blade on an angle grinder?
The blade of your angle grinder is held in place by a locking nut. Changing the blade requires this nut to be loosened and removed. This is usually done using a special two-pronged wrench. A wrench that fits the size and shape of your angle grinder’s locking nut should have been in the box when you purchased it.
When should I replace my angle grinder disc?
Always replace a cutting disc if it shows any signs of damage. This includes, but is not limited to visible cracks and chips or any signs of bending or twists to the wheel. Cut off wheels should be replaced when they hit their expiration date. This can be found imprinted on the metal center of the disc.
What is the most popular size angle grinder?
The most commonly used sizes are the 4” and 4 ½”. These grinders typically have the capacity for wheel diameters of up to 7”, with particularly small versions having the capacity for 3” discs.
Can I cut slabs with an angle grinder?
Chalk or a pencil. A workbench. Four C-clamps (to secure the slab in place) Power saw or angle grinder with a diamond-tipped blade made specifically for stone or masonry (this is important as blades made for wood will become dull almost immediately)
Which way do you loosen an angle grinder?
Here’s the easiest way to change an angle grinder wheel: Hold the wheel lock button down and turn the wheel until it locks. Turn the Kwik Lock flange counterclockwise by hand until it loosens.
Is it OK to use a cut-off wheel as a grinder wheel?
NEVER attach a Type 1 straight or cut-off wheel to this angle grinder. Use for any other purpose is not recommended and creates a hazard, which will result in serious injury.
When should you throw away a cutting wheel?
If you do not know, a good “rule of thumb” is to discard the wheel when you are 1” away from the recess. Portable cup wheels must be discarded when the machine’s guard prevents proper grinding. In this case a proper guard will determine discard size by preventing additional grinding on the wheel’s rim.
How long do grinding discs last?
1 – Cutting and Grinding Discs Have Expiry Dates. This date is generally printed on the centre ring and is at a maximum three years from the manufacture of the disc. On smaller discs which lack a ring, this date may be printed on the label or even the disc itself.
What tools use to remove the angle grinder discs?
A pin wrench is the required tool that comes with an angle grinder and is used to remove a disc. This wrench resembles a pitchfork and has two knobs on the end that you insert into the drive bolt to loosen the nut holes that attach to the disc.
How do you unlock a ground grinder?
In order to unlock the grinder, you will need to save up your Raw Science and hunt down a specific BURG. L chip. After that, it’s smooth sailing, er, grinding.
What is the difference between a cutting disc and a grinding disc?
Clue is in the title, a cutting disc is thin and used for cutting and a grinding disc is much thicker and used for grinding not cutting.
Can I use bigger disc on angle grinder?
Fitting a 14 inch (356 mm) cut-off disc to a 9 inch (230 mm) angle grinder will increase the edge speed excessively to at least 120 m/s (430 kmph). The photograph below shows an angle grinder with the wrong size cutting disc fitted and the guard removed.
