Ready to make a differenc.
For more strength and longer life, we’ve made new, better gears that have built-in gear support.
It must be at least 1.5.
Most 1/4″ hex tools can be used with this. It comes with a Phillips driver bit.
When drilling, use a handle with a finger grip for the most comfort and control possible.
With the Drive90PLUS Right Angle Drill attachment, you can make your power drill more versatile. Insert the Drive90PLUS into the chuck of your drill, and you’ll be able to get into places that are hard to get to. Impac. Ready with new gears that will last longer and be more durable. The design makes drilling as comfortable and easy as possible. Less than one-half “wide, so you can get into those small places with the most reach. To help with drilling at an angle, the handle has a flat back. The magnet is 1/4 of an inch “hex sockets can be used with most standard hex accessories.
I really liked that there was very little slop in the drive. It was almost impossible to tell. In the past, it seemed like there was no lubrication or it used bushings instead of bearings, which made it sound “dry. This isn’t what happened. I thought I had the right tool for the job in a very small space. It went through the OSB without a hitch. When I tried to go through the glue-lam, it looks like the gearbox was ripped out. The search for a good 90-degree drill adapter will go on.
