Abrasive cutting blade guard, semi enclosed, with clamping screw. To work with fiberglass reinforced, resin-bonded cutting discs. For working with cutting discs, diameter: 150 mm, especially for WE 1450-150 RT..
150mm angle grinder guard Related Question:
Does an angle grinder need a guard?
Wheel guards serve to deflect sparks and debris away from users, and to shield and protect them from abrasive cutting and grinding wheels, which can cause serious damage if (when) they fail and fly off. OSHA regulations require the use of guarding on angle grinders.
What is a Type 1 grinder guard?
Type 1 is for grinding, type 1a is for cutting. Type 27 is for grinding, type 27a if for cutting. Same rule applies, use the larger guard for the Type 27 wheels (Or depressed wheels) Use the smaller guard for type 1 wheels.
What is angle grinder guard for?
Disc guard. A disc guard is an essential safety component of an angle grinder. It prevents hot sparks and debris from flying towards you. It also protects the fast-spinning abrasive cutting or grinding wheels from hurting your arms, hands, and body.
How much of a grinding wheel should be covered by the guarding system?
Maintain 6 mm (1/4 in.) wheel exposure with a tongue guard or a movable guard. Check that wheels have blotters on each side. Check the wheel fits properly to the spindle when mounting.
What is the cutting thickness for an 18cm disc and what can you cut with it?
The 18cm discs can be used for small pieces of wood, thin metal and aluminium, which are 4-5cm thick. The 23 cm discs can cut larger pieces of any material that is 7-8cm thick.
What is a Type 27 angle grinder guard?
Explanation: Type 27 & 28 guards are open on the bottom to allow for side grinding with raised hub/depressed center wheels. When side grinding with the Type 27 or Type 28 wheel, the work piece acts as a portion of the guard, protecting the operator in the event of a wheel breakage.
Is it OK to use a cut off wheel as a grinder wheel?
NEVER attach a Type 1 straight or cut-off wheel to this angle grinder. Use for any other purpose is not recommended and creates a hazard, which will result in serious injury.
Are 9 inch grinders illegal?
9 inch (230 mm) angle grinders have been banned on some work sites due to the increased risk of injury. The increased power and size of the unit will cause more severe kickback and gyroscopic effects (i.e. makes the grinder difficult to manoeuvre).
Are 9 inch grinders illegal in Australia?
In August 2015, a worker on a DHA site suffered an electric shock from using a 9 inch grinder. This type of equipment is prohibited on many construction sites in Queensland and throughout Australia due to a historically large number of injuries from kickback and shattering of blades.
What is a 9 inch grinder used for?
Angle grinders are versatile tools that can grind metal and cut tile, stucco and pavers, rout out mortar, plus they can sand, polish and sharpen. Learn to use an angle grinder to cut tile, mortar and pavers; make quick work of rust and loose paint removal; sharpen blades and cut or grind steel.
Are angle grinders safe?
Angle grinders can cut through stone, concrete, metal and other hard materials, so they have no trouble cutting through human flesh and bones. Contact with the wheel while in operation can have serious consequences, with deep cuts and even amputations.4 days ago
Should you wear gloves when using an angle grinder?
Yes you should wear gloves when using an angle grinder. Angle grinders are a dangerous tool, and you should wear gloves, eye protection, and hearing protection when you use them.
What direction should you feed the cutting disc into the workpiece?
The direction of the cutting motion is important. Always feed the cutting disc into the work so that it cuts in an upward direction.
What are most angle grinder injuries from?
Most angle grinder injuries are from metal particles lodging in the operator’s eye. However, the most serious injuries are from kick-back, where the disc is thrust back violently towards the operator. Angle grinders used with cutting discs expose workers to a range of severe additional hazards.
What is a Type 27 grinding wheel used for?
The Type 27 grinding wheels are a very popular group of general purpose and specialized abrasive tools intended for rough grinding on various materials. They are commonly used in building, shipbuilding, metal, foundry, engineering, chemical and other industries as well as in smaller workshops.
